You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Printed Wideband Metamaterial Antennas for Ballistic Panels

    SBC: Applied Nanotech, Inc.            Topic: N10AT021

    The U.S. Navy has initiated a program to develop the next-generation Joint Counter Radio Controlled Improvised Explosive Device Electronic Warfare (JCREW) 3.3 system to detect and jam enemy improvised explosive devices (IEDs). The objective of this propos

    STTR Phase II 2013 Department of DefenseNavy
  2. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Program
  3. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy
  4. Information-based Norms on Flow, Operations and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase II 2019 Department of DefenseNavy
  5. Anesthesia Ventilator for Atlantic Bottlenose Dolphins and California Sea Lions

    SBC: Innovative Veterinary Medicine, Inc.            Topic: N14AT015

    Innovative Veterinary Medicine, Inc. has conceptualized and designed an anesthesia ventilator named DolVent™ specifically for the Navy Atlantic bottlenose dolphins and California sea lions. The DolVent™ ventilator design will support the normal physiologic state of these animals using ventilation modes mimicking their natural breathing including the modes of Airway Pressure Release Ventilation ...

    STTR Phase II 2016 Department of DefenseNavy
  6. Detect and Avoid Certification Environment for Unmanned Air Vehicles (UAVs)

    SBC: RDRTec Incorporated            Topic: N18AT007

    The objective of this project is to develop a comprehensive suite of tools, called the DAA Radar Software Suite and Simulation (DAA-RSSS), that supports future Navy procurement and certification of non-cooperative sensor technologies for Detect And Avoid (DAA) as well as develop plans to support EO/IR sensors as the non-cooperative sensor as informed by FAA activities in developing Minimum Operati ...

    STTR Phase II 2019 Department of DefenseNavy
  7. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT008

    Texas Research Austin (TRI-Austin) will continue to partner with the University of Texas, Austin, to use additive manufacturing for fabricating and optimizing the lithium ion and electroactive metal electrode systems for which the team established proof of concept in the Phase I base period. The Aerosol Deposition Method (ADM) is a broadly applicable additive manufacturing technology that has been ...

    STTR Phase II 2019 Department of DefenseNavy
  8. Physics-based Computationally Efficient Spray Combustion Models for LES of Multiphase Reacting Flows

    SBC: CFD Research Corporation            Topic: N17AT002

    One important challenge for the reliable prediction of liquid fuel effects on the combustion in aviation combustors and augmentors is the accurate modeling of underlying physical processes, involving the evaporation of fuels, preferential vaporization, scalar mixing and ignition. LES methodologies are required to accurately capture these transient and inherently unsteady combustion processes. In t ...

    STTR Phase II 2019 Department of DefenseNavy
  9. Ocean Surface Vector Winds (OSVW)

    SBC: Atmospheric & Space Technology Research Associates, L.L.C.            Topic: N16BT026

    Ocean surface winds are critically important in naval operations. They may aid, hinder, or negate maneuvers and operations, and are a primary consideration in routing ships. Continuous and reliable information on favorable and unfavorable sea state is critical for a broad range of naval missions, including strategic ship movement and positioning, aircraft carrier operations, aircraft deployment, e ...

    STTR Phase II 2019 Department of DefenseNavy
  10. Wireless Torque Sensor for Condition Based Maintenance

    SBC: Albido Corporation            Topic: N11AT030

    In recent years, the need for highly reliable, durable and non-intrusive systems for monitoring the health condition of naval structures becomes more and more recognized. Of particular importance is the condition based maintenance of Navy rotating machinery (motors, generators, pumps, gear systems, etc.). Such Structural Health Monitoring (SHM) systems should be able to detect failures in their ea ...

    STTR Phase II 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government