You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Micro Identification Friend or Foe (IFF)

    SBC: R Cubed Engineering, LLC            Topic: N142102

    Development of a small UAS compatible Micro IFF transponder including Modes 1,2,3A,C,S , Dual band ADS-B, UAT, Mode 5 and interrogator. All modes include both receive (in) and transmit (out). Size is less than 8 cu inches and weight is under 6 oz with full AIMS 17-1000 compliance, including 500 watt output with diversity. Unit is also low cost and low maintenance. Unit meets full military temperat ...

    SBIR Phase II 2019 Department of DefenseNavy
  2. Compact Off-board Passive Target-Discriminator

    SBC: ANALYSIS DESIGN & DIAGNOSTICS INC            Topic: N131079

    Under the subsequent Phase II program, Analysis, Design & Diagnostics, Inc. will work closely with the Office of Naval Research (ONR) and the technical development team from NSWC Panama City to further advance this technology to support mining S&T programs in both shallow and deep water environments. The culmination of this effort will be an end-to-end technology demonstration of the next generati ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. High Bandwidth Redundant Communication Links for Small Satellites

    SBC: Innoflight, Inc.            Topic: A16079

    Innoflight will develop a high performance software-defined compact radio (SCR) with Ka and X dual band downlink capability and S Band uplink capability. The Ka / X SCR will support 300 Mbps downlink and 5 Mbps uplinks rates using advanced spectrally efficient waveforms. It will offer interoperability with standard government and commercial ground stations such as the Army RGT (Remote Ground Termi ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  4. Fast, High Resolution 3-D Flash LIDAR Imager

    SBC: Advanced Scientific Concepts, LLC            Topic: N101083

    The objective of this Phase II.5 program is to design, fabricate, test and calibrate a self-contained, 320 x 320 focal plane array, 3D LIDAR Underwater Camera (3D LUC) which will robustly function in an over-water, aircraft environment. The goal is to output three LUCs and components from the program, through the supporting FNC; two LUCs for existing programs of record, one LUC for the potential F ...

    SBIR Phase II 2013 Department of DefenseNavy
  5. Cross-Cockpit Collimated Displays for Flight Simulation

    SBC: Q4 Services LLC            Topic: N08146

    To develop and deliver a back projection screen and projector mounting assembly that is designed specifically to take advantage of the technological advancements that have taken place in the commercial display marketplace. With the introduction of light weight, very high performance projectors, it has become possible for the first time to take a true COTS projector and install it on a full-motion ...

    SBIR Phase II 2010 Department of DefenseNavy
  6. Development of High Gain SiGeC CMOS Imaging Arrays for Visible Sensing

    SBC: Quantum Semiconductor LLC            Topic: NM12158

    This project will study experimentally and theoretically SiGeC photo-diodes with a novel internal gain mechanism that is not avalanche by impact ionization. The new gain mechanism has been shown to be noiseless and operates at low voltage, which makes it compatible with standard CMOS devices and circuits. The new internal gain in the SiGeC photo-diodes, coupled with suitable circuitry, will enable ...

    SBIR Phase II 2019 Department of DefenseNavy
  7. Phase II.5 SBIR: SiNC Ceramic Fibers for the IHPTET/VAATE Engine

    SBC: EDWARD POPE DR            Topic: N02169

    This Phase II.5 SBIR program aims to scale-up the production of MATECH’s SiNC-1400X structural ceramic fiber tow, developed with prior Navy SBIR funding, to enable ceramic matrix composite (CMC) fabrication suitable for pre-qualification testing and evaluation for application to JSF engine hardware. MATECH will manufacture SiNC-1400X ceramic fiber tow to suitable levels for GE to fabricate CMC t ...

    SBIR Phase II 2010 Department of DefenseNavy
  8. Cooling Shirt for Workers in Hot Environments

    SBC: TDA Research, Inc.            Topic: NX19005

    TDA Research Inc., and its industrial clothing manufacturing collaborator propose to develop a simple, comfortable, lightweight, durable cooling shirt that will keep welders in Navy shipyards cool and comfortable, while protecting them against heat related illness. The shirt uses a minimum of consumables. TDA’s cooling shirt technology has been patented (U.S. 9,635,889 Bl, Cooling Garment, May 2 ...

    SBIR Phase II 2019 Department of DefenseNavy
  9. Technology Development of a Polarization Capable Multi-Mission EO/IR Turret (On-board Real Time Processor)

    SBC: Advanced Coherent Technologies LLC            Topic: N06013

    The focus of this effort is to take Advanced Coherent Technologies, LLC's (ACT's) current multispectral/hyperspectral (MSI/HSI) system, developed in the first two Phases of this SBIR, and miniaturize the onboard processor and improve the onboard processing algorithms. Miniaturization is needed to insure the overall system fits within the size, weight, and power (SWaP) envelope of the RQ- ...

    SBIR Phase II 2013 Department of DefenseNavy
  10. GPS and JTRS: Concepts for Network Navigation

    SBC: Data Fusion Corporation            Topic: N07188

    Data Fusion Corporation (DFC) proposes the development of prototype, next-generation GPS interference detection, geolocation, and mitigation modules that can be incorporated into the Joint Tactical Radio System (JTRS) Software Defined Radio (SDR) or a commercial-off-the-shelf (COTS) SDR.

    SBIR Phase II 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government