Award Data

The power output of the high power lasers used in physics research is limited by the materials available for making gain media. Future increases in power require new and better materials. Operation at high power creates great thermal stresses that can lead to birefringence, thermal lensing or physical damage to the host. Effective cooling and small temperature gradients are critical for achieving ...

Current prosthetic feet produce much less peak mechanical power than the able-bodied foot/ankle and release only about half of the mechanical energy generated during gait. This leads to higher energy expenditure among amputees as compared to able-bodied i

The composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...

The development of radiation detection materials would benefit with greater access to computational models that relate physical traits seen in manufacture with complex energy transitions occurring in the material that control operating performance. However, the HPC requirements behind these models remain beyond the reach of most businesses involved in this small yet vital field impacting National ...

Direct Solar in partnership with Colorado State University's Next Generation PV Center (NGPV) and H. B. Fuller Company will develop a new solar module architecture and manufacturing process optimized for crystalline silicon (c-Si) modules that significantly reduces manufacturing costs and improves reliability. The outcome of this program will be a new c-Si module design, streamlined manufacturing ...

It is attractive therefore to turn Carbon dioxide (𝐶𝐶𝑂𝑂2) which is typically considered a pollutant, into a valuable industrial resource. Plasma has long been known as an attractive method of treating 𝐶𝐶𝑂𝑂2 in order to produce other industrial feedstocks such as CO. For this process to be industrially viable, plasma treatment of 𝐶𝐶𝑂𝑂2 must be improved to minimiz ...

Over 1 billion people suffer from the effects of water scarcity. The vast majority of those affected live near a coastline in developing countries, on islands, and in remote communities. To satisfy the potable water needs of a growing world population, experts agree that seawater desalination on a large scale is required. Near-shore ocean waves provide an inexhaustible, consistent, and widely dist ...

Plastics are indispensable materials for the modern life and global economy, but current practices in the generation and disposal of commodity plastics are largely unsustainable and causing severe worldwide plastics pollution and enormous materials' energy and value losses to the economy. In particular, plastics are a material of choice in packaging applications but they are currently designed for ...

The problem being addressed is the development of high intensity ultrashort pulse lasers, in recognition that today’s ultra-high intensity lasers are limited to repetition rates of < 10 Hz. Technical solutions are sought to enable the generation of high energy (joule-level) laser pulses that can be focused to highly relativistic intensity at high repetition rates (100-1000 Hz). The proposed proj ...

Vast amounts of impaired waters are produced in gas and oil wells. Energy-efficient desalination systems are needed to treat these waters to produce fresh water and concentrated brines. Mineral recovery systems can also yield valuable critical materials as byproducts. Savengy Technologies and University of Central Florida (UCF) will develop and commercialize an energy efficient system to treat sha ...