You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. POC Blood Coagulopathy Monitor

    SBC: CFD Research Corporation            Topic: DHA19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  2. Multi-Functional Nanotube-Based Sensor Array for Detecting Blood Coagulation Defects

    SBC: Innosense Llc            Topic: DHA19A001

    Defense Health Agency (DHA) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  3. Integration of TRISO Fuel Particles with Open-Cell Foam for Increased Safety, Heat Transfer, and Fuel Performance

    SBC: Ultramet            Topic: 33b

    Tristructural isotropic (TRISO) fuel is a key component of advanced small modular nuclear fission reactors due to its inherent safety at high temperatures and irradiation levels and decreased proliferation risk relative to current reactor fuels. A more efficient cooling method for TRISO fuel compacts would increase heat transfer, allow for an increase in fuel density, and further improve accident ...

    STTR Phase I 2019 Department of Energy
  4. The Energy and Cost-efficient E-waste recovery project for rare-earths and precious metals

    SBC: Quantum Ventura, Inc.            Topic: 07d

    Idaho National Laboratory (INL), under funding from the Critical Materials Institute, has developed a US patented technology to reclaim valuable metals from waste electronic equipment. The Electrochemical Recycling Electronic Constituents of Value (E-RECOV) method uses an electrochemical cell to efficiently recover the bulk of metals from discarded electronics, leading to more complete recycling o ...

    STTR Phase I 2019 Department of Energy
  5. No Stress PFC Bonding Technology

    SBC: SEALED OPTICS COMPANY            Topic: 23a

    Electric power generation regularly necessitates the conversion of heat into useful work. Except for some renewable forms, all energy production involves high-temperature. In cases such as fusion, fission, gas-turbine, and fuel cells, the operating temperatures can be very high. Working parts exposed to these environments are thermally stressed. The material joints found in multi-component parts m ...

    STTR Phase I 2019 Department of Energy
  6. Low-temperature chemical looping reforming catalysts for small-footprint GTL

    SBC: Catalytic and Redox Solutions, LLC            Topic: 22a

    Methane from U.S. shale deposits has significantly increased the usable amount of this domestic energy resource. Meanwhile, flaring of natural gas, which is commonly practiced in shale-oil production, exceeded 6 billion cubic meters in the United State annually. This leads to a waste of valuable energy resources and significant emissions of greenhouse gas. As such, small-footprint technologies tha ...

    STTR Phase I 2019 Department of Energy
  7. Compact, High-Efficiency Air Handling Unit (CHE-AHU) for Residential HVAC Systems

    SBC: UPSTATE PARTS & SUPPLY INC            Topic: 09a

    AHUs for residential HVAC systems typically use low-efficiency blower fans (evaporator side) and simple axial fans (condenser side), and the fan and the surrounding High Resistance Mediums (heat exchanger. filter, burner, etc.) are treated as stand-alone components during design optimization. With the recent introduction of high speed electronically commuted motors (high- speed ECM), it is now pos ...

    STTR Phase I 2019 Department of Energy
  8. New Crystalline Silicon Module Architecture to Reduce Costs withImproved Manufacturability andDurability

    SBC: Creative Light Source, Inc            Topic: 16a

    Direct Solar in partnership with Colorado State University's Next Generation PV Center (NGPV) and H. B. Fuller Company will develop a new solar module architecture and manufacturing process optimized for crystalline silicon (c-Si) modules that significantly reduces manufacturing costs and improves reliability. The outcome of this program will be a new c-Si module design, streamlined manufacturing ...

    STTR Phase I 2019 Department of Energy
  9. Novel Membrane System for Lithium Recovery from Oilfield Brines

    SBC: BETTERGY CORP.            Topic: 17b

    Enriching lithium from oilfield brines while performing desalination of the produced water can provide a solution that recovers valuable lithium from highly mineralized brine while at the same time making possible to reuse and recycle the treated waste water. State-of-the-art technologies for recovering lithium from oilfield brine include gravity separation, gas flotation, and flocculation. These ...

    STTR Phase I 2019 Department of Energy
  10. Large Volume Plasma Generation for CO2 Processing

    SBC: FGC Plasma Solutions, Inc.            Topic: 20d

    It is attractive therefore to turn Carbon dioxide (𝐢𝐢𝑂𝑂2) which is typically considered a pollutant, into a valuable industrial resource. Plasma has long been known as an attractive method of treating 𝐢𝐢𝑂𝑂2 in order to produce other industrial feedstocks such as CO. For this process to be industrially viable, plasma treatment of 𝐢𝐢𝑂𝑂2 must be improved to minimiz ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government