You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Physics-based Computationally Efficient Spray Combustion Models for LES of Multiphase Reacting Flows

    SBC: CFD RESEARCH CORPORATION            Topic: N17AT002

    One important challenge for the reliable prediction of liquid fuel effects on the combustion in aviation combustors and augmentors is the accurate modeling of underlying physical processes, involving the evaporation of fuels, preferential vaporization, scalar mixing and ignition. LES methodologies are required to accurately capture these transient and inherently unsteady combustion processes. In t ...

    STTR Phase II 2019 Department of DefenseNavy
  2. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy
  3. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting Power Cables

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: N16AT011

    The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Epitaxial Technologies for Gallium Oxide Ultra High Voltage Power Electronics

    SBC: AGNITRON TECHNOLOGY, INC.            Topic: N16AT023

    xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Information-based Norms on Flow, Operations and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase II 2019 Department of DefenseNavy
  6. Multi-vehicle Collaboration with Minimal Communications and Minimal Energy

    SBC: ORBIT LOGIC INCORPORATED            Topic: N17AT029

    Orbit Logic,the University of Colorado, and the University of California are developing a hierarchical autonomous mission planning and response capability for Autonomous Underwater Vehicles (AUVs) to address the challenges associated with long duration operations. The research is innovating approaches to the exchange of information between collaborating vehicles enabling onboard decision-making to ...

    STTR Phase II 2019 Department of DefenseNavy
  7. Low Cost Magnetic Sensor for Mine Neutralizer Identification and Charge Placement

    SBC: QUSPIN INC.            Topic: N17AT013

    Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...

    STTR Phase II 2019 Department of DefenseNavy
  8. A Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE

    SBC: Intelligent Automation, Inc.            Topic: N17AT022

    To address the need of auto-extracting data relevant to significant events and to archive patterns, Intelligent Automation, Inc. (IAI) team proposes to continue developing a Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE. The key innovations of our proposed SEE system are (1) a large class of analytics that extract valuable and important information from raw data, a ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Innovative Material Handling System for the Expeditionary Mobile Base (ESB) Class Ship

    SBC: ADVANCED TECHNOLOGY AND RESEARCH CORPORATION            Topic: N17AT012

    ATR proposes the development of an innovative Advanced Dual-Purpose Elevator System (ADPES) that can be installed on an Expeditionary Base Mobile (ESB) so that aircraft and cargo can be transferred from the flight deck to the mission bay and watercraft like the Combatant Craft Medium (CCM) can be launched and recovered from mission bay to the sea. The ADPES consists of a submersible platform and t ...

    STTR Phase II 2019 Department of DefenseNavy
  10. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: STORAGENERGY TECHNOLOGIES INC            Topic: N18AT008

    The objective of the efforts being proposed is to develop high energy density and power density batteries with long cycle life by high-speed additive manufacturing technologies.

    STTR Phase II 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government