You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHP17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Program
  2. Innovative Methodologies for Manufacturing of Lethality Test Articles

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost. However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat target ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  3. Principled Design of an Augmented Reality Trainer for Medics

    SBC: Unveil LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  4. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHP17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  5. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  6. Simultaneous Multiple Object Detection System

    SBC: SEMQUEST, INC.            Topic: MDA16T006

    An advanced hit detection technology is needed for MDA that can report impacts at hyper-velocities and at multiple hit locations.We present a technology with a high level of performance that leverages decades of hit technology experience and utilizes existing technologies developed under previous efforts.Our technology offers a low latency non-interpolated direct indicator of multiple hit location ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  7. High-Speed Simultaneous Multiple Object Detection System

    SBC: FREENT TECHNOLOGIES, INC.            Topic: MDA16T006

    FreEnt Technologies, Inc., A2Z Innovations, Inc., and the University of Alabama Aerospace Research Center (UAH/ARC) have teamed together to design, develop, and perform ground-based-demonstrations of a High-Speed Simultaneous Multiple Object Detection (HS-SMOD) System for MDA. The HSSMOD system uses a simple but innovative technique of a passive fiber-optic grid and high-speed COTS opto-electronic ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  8. Fine Powder Cathode and Separator Binder Characterization for Thermal Batteries

    SBC: CFD Research Corporation            Topic: MDA16T001

    Fine powder thermal battery cathode materials can exhibit challenging flow properties which makes processing with automated presses difficult.Granulating these powders can substantially improve flow properties and reduce the tendency for powder segregation during handling and pressing operations.Additionally, the properties of MgO that lead to good performance in thermal battery separators are not ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  9. Proactive Risk Monitoring Using Predictive Analytics

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: MDA16T002

    Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  10. POC Blood Coagulopathy Monitor

    SBC: CFD Research Corporation            Topic: DHP19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government