Award Data

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

Accurate real-time waterborne pathogen detection is of paramount importance to security of U.S. military forces and installations. Fieldable high-throughput pathogen concentration is a critical analytical need for enhanced detection performance. Existing concentration methods are time-consuming, bulky, labor-intensive, power- and reagent-hungry, and consequently ill-suited for battlefield deployme ...

Phase I objective is to demonstrate the feasibility of our proposed passivation approach to minimize the dark current noise and improve the quantum efficiency in the GaSb based type II superlattice detectors. Phase I goal is to demonstrate the feasibility of our technology to fabricate photodiodes with cut-off wavelength in excess of 10µm, quantum efficiency exceeding 70% and dark current density ...

Hypersonic missile defense systems are being designed to reach global threats. During flight, external surfaces are predicted to reach temperatures in excess of 2200C. As a result, innovative, high performance thermal protection systems (TPS) are of great demand. Among ultra-high temperature ceramics (UHTC), it is well known that ZrB2- and HfB2-based materials have high melting temperatures and ...

The project will remove a key difficulty that currently hampers many existing methods for computing unsteady electromagnetic waves on unbounded regions. Numerical accuracy and/or stability may deteriorate over long times due to the treatment of artificial outer boundaries. We propose to develop a universal algorithm and software that will correct this problem by employing the Huygens'principl ...

There is a need to develop affordable and specific biosensors to defend against current and future biological threats. Biological methods of detection have been evolved by nature to detect molecules at the micro-scale with flexible specificity and with downstream effectors. Advances in cell-free technology allow for deployment of biosensors on pH-strip-type paper, an affordable, robust, disposable ...

Chemical agents in aerosol form have been identified as a major threat, and there is now interest in applying the long wave infrared frequency agile laser sensor to detection of this important agent form. If successful, it would be possible to perform detection of chemical agent vapors and aerosols and biological aerosol agents with a single dual-use sensor. To accomplish this, it is critical to ...

Within this STTR program, Carbonics will partner with USC to commercialize CNTFET based transistor technology that is compatible with wafer-scale monolithic integration process flows whilst offering exceptional performance at mm-Wave frequencies that can outperform incumbent semiconductor high frequency technologies (GaAs, SiGe, RF-CMOS).