You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Cognitive Adaptation and Mission Optimization (CAMO) for Autonomous Teams of UAS Platforms

    SBC: Opto-knowledge Systems, Inc.            Topic: N17BT035

    The Navy needs cognitive control capabilities that enable an autonomous robotic team comprised of a ground control station node and a team of UAS platforms to operate independently (or with minimal human oversight) while carrying out complex missions. A cognitive control capability needs to be developed that concurrently optimizes the balance of mission risk / performance with respect to the Navy ...

    STTR Phase II 2019 Department of DefenseNavy
  2. AeroQUEST II: Aeromedical Quantified Understanding via Experimental Standards Toolkit

    SBC: Aptima, Inc.            Topic: DHA17C001

    Adverse physiological events (PEs) have plagued warfighters piloting military aircraft, particularly incidents involving hypoxia and cockpit cabin decompression. Although a variety of research has been performed to try to understand the problems and root

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  3. Mine Target Reacquisition for Next Generation Mine Neutralization Systems (Sonar SLAM)

    SBC: Physical Sciences Inc.            Topic: MDA12T001

    The US Navy is moving towards a Single Sortie Detect to Engage (SSDTE) paradigm to implement in-stride minehunting and mine prosecution. Integrating in-stride Mine Search and Mine Prosecution functions is a key requirement to achieve the SSDTE paradigm. Mine Target Reacquisition between the mine search operations and mine prosecution phases poses a particular challenge, as planned mine prosecution ...

    STTR Phase II 2019 Department of DefenseNavy
  4. Protocol Feature Identification and Removal

    SBC: P&J ROBINSON CORP            Topic: N18AT018

    Protocols used for communication suffer bloat from a variety of sources, such as support for legacy features or rarely used (and unnecessary) functionality. Traditionally, the Navy subscribes to a blanket adoption of a standard protocol "as is". Unnecessary features are active and can be accessed by both internal and external systems creating security vulnerabilities. PJR Corporation's (PJR's) Pha ...

    STTR Phase II 2019 Department of DefenseNavy
  5. MEDUSAE: Tactically Relevant Jellyfish-Inspired Profiling Floats PH II

    SBC: Boston Engineering Corporation            Topic: N18AT025

    With MEDUSAE, our world class team proposes to leverage our extensive experience, existing technology, and a unique approach to lightweight, long lasting, self-recharging jellyfish-inspired floats to fill an oceanographic sensing capability gap for the Navy. Our experience in bio-inspired robot (including jellyfish), nonconventional actuation, and energy harvesting development promises to provide ...

    STTR Phase II 2019 Department of DefenseNavy
  6. Optimized High Performance Stainless Steel Powder for Selective Laser Melting Additive Manufacturing (AM)

    SBC: Shepra, Inc.            Topic: N16AT007

    Stainless steel is a vital component of many air, land and sea systems that support the Navy warfighter. In particular, 17-4 precipitation hardened stainless steel, (17-4 PH SS) with its extrodinary combination of strength, ductility, high temperature performance and corrosion resistance plays an important role in supporting the warfighter. When processed conventionally, 17-4 PH SS typical exhibit ...

    STTR Phase II 2018 Department of DefenseNavy
  7. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy
  8. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  9. Information-based Norms on Flow, Operations and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase II 2019 Department of DefenseNavy
  10. No Power Bionic Lower Extremity Prostheses

    SBC: Liberating Technologies, Inc.            Topic: DHP16C007

    Current prosthetic feet produce much less peak mechanical power than the able-bodied foot/ankle and release only about half of the mechanical energy generated during gait. This leads to higher energy expenditure among amputees as compared to able-bodied i

    STTR Phase II 2019 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government