Award Data

The purpose of this STTR is to develop comprehensive detailed kinetics for oxidation of C-SiC-SiO2-rubber in extreme oxidizing environment. This material is used as a coating on the outer surface of Navy weapon systems. In order to predict the fate of this material under extreme conditions and mitigate the degradation of the coating, a comprehensive oxidation mechanism is required. In Phase I, CFD ...

The Navy is developing an electromagnetic (EM) launcher for long-range naval surface-fire-support. Severe operating conditions of the EM system place stringent requirements for materials, including high current and magnetic fields, high temperatures, contact with liquid metals, high stress/gouging from balloting contacts and high-speed-sliding electrical-contact with an Al armature. Engineered Coa ...

The objective of this proposal is to demonstrate the feasibility of a new thromboelastograph (TEG)-like instrument that has the same basic capabilities as the TEG – that is to say, capabilities of monitoring in vitro the kinetics, strength, and stability of clot formation in blood samples that are clot induced – but which is miniaturized, highly portable, rugged, and insensitive to adverse env ...

Software is rarely written entirely from scratch. Typically, third-party commercial off-the-shelf (COTS) components are integrated into larger software systems used both in the commercial sector and in critical infrastructure. Third-party components often come in binary form, e.g., as dynamically linked libraries, Active X controls, or plain executables. That is, the source code for those componen ...

Impact Technologies, in collaboration with Penn State Applied Research Laboratory, proposes to develop an advanced Battery Monitoring and Management System (BMMS) for lithium-ion battery packs that ensures adequate, safe, and reliable operation. This system will focus on real time diagnostics, prediction of catastrophic failure, and risk assessment for individual cells in high power applications. ...

Impact Technologies, in cooperation with Dr. Mohammed Daqaq from Clemson University, propose to develop a magnetostrictive materials based device for harvesting energy from mechanical vibration. The energy harvesting device will harness power from ship-hull vibrations in order to power sensing devices. This technology will be a key enabler for improved structural and machinery health management. K ...

Impact Technologies, in collaboration with the Georgia Tech Center for Innovative Fuel Cell and Battery Technologies, proposes to develop tools for Lithium Ion Battery Risk Assessment (LIBRA). These tools will allow the Navy to analyze proposed Li-Ion battery designs and assess the overall risk to the platform in the event of failure in a single cell. The tool will also predict the effects of a ca ...

Impact Technologies and Montana State University propose to develop a Dynamic Prognostic and Health Management (PHM) modeling capability and related test, validation, and support toolsets that will enable standardized approaches to model representation, information exchange, and PHM system support, providing for improved integration, interoperability and reuse of developed and emerging capabilitie ...

Network-centric command and control of complex military missions (e.g., anti-submarine warfare, collaborative mine hunting, etc.) calls for cost-effective designs that can dynamically tradeoff multiple conflicting objectives. Often these optimizations have to be carried out at a higher level, and the associated control directives have to be disseminated down to a distributed system, thereby, influ ...

The key innovation of this proposal is to develop an adaptive and scalable network resource virtualization framework. The framework employs simple yet efficient mechanisms to deliver a comprehensive network resource virtualization solution through network virtualization, service discovery/advertisement, and service differentiation in mobile ad hoc networks (MANETs). It uses local caching to facili ...