You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Wide Bandgap Nanostructured Space Photovoltaics

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a wide-bandgap GaP-based space solar cell capable of efficient operation at temperatures above 300oC. Efficiency enhancement will be achieved by the introduction of InGaP quantum wells within the active region of the wide-gap base material. The introduction of these nanoscale features ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  2. Nanowire Photovoltaic Devices

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a space solar cell having record efficiency exceeding 40% (AM0) by the introduction of nanowires within the active region of the current limiting sub-cell. The introduction of these nanoscale features will enable realization of an intermediate band solar cell (IBSC), while simultaneous ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Terahertz Quantum Cascade Laser Based 3D Imaging

    SBC: LONGWAVE PHOTONICS LLC            Topic: T7

    The NASA Constellation program has a need to non-destructively test (NDT) non-metallic materials (foams, Shuttle Tile, Avcoat, etc) for defects such as delaminations and voids. While imaging systems at terahertz frequencies (0.3 to 3 THz) have been demonstrated for 2D imaging of similar materials, they have not yet demonstrate full 3D volumetric imaging. To meet this need, LongWave Photonics pro ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  4. Innovative Solid State Lighting Replacements for Industrial and Test Facility Locations

    SBC: Energy Focus, Inc.            Topic: T1002

    The proposed innovation is the replacement of existing test stand and parking lot fixtures with current SSL LED technology. The replacement fixtures will reduce energy consumption, generate less heat and provide maintenance free operation for over 50,000 hours. An explosion-proof fixture is capable of containing an internal combustion event without allowing flames or hot gasses to escape to the s ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  5. Magnetically Modified Asymmetric Supercapacitors

    SBC: GINER INC            Topic: T601

    This Small Business Innovation Research Phase I project is for the development of an asymmetric supercapacitor that will have improved energy density and cycle life. Supercapacitors that utilize an aqueous electrolyte are limited to a maximum voltage of 1 volt due to the decomposition of water. Methods used to increase voltage include use of an organic electrolyte, which introduces additional comp ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  6. Microchannel Thermo Catalytic Ignition for Advanced Mono- and Bipropellants

    SBC: Plasma Processes, LLC            Topic: T301

    Small and micro-spacecrafts require the efficient, micro-propulsion systems. Chemical micro-propulsion is best suited for use as primary thrust, orbital insertion and attitude control because of its high energy density. When grouped into arrays for larger thrust applications, micro-propulsion devices provide high propulsive flexibility or can be used as igniters. The proposed effort will focus ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  7. Mesh Generation and Adaption for High Reynolds Number RANS Computations

    SBC: Research South, Inc.            Topic: T801

    This proposal offers to provide NASA with an automatic mesh generator for the simulation of aerodynamic flows using Reynolds-Averages Navier-Stokes (RANS) models. The tools will be capable of generating high-quality, highly-stretched (anisotropic) grids in boundary layer regions and transition smoothly to inviscid flow regions even in an adaptive context. The objective of the work is to offer a un ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  8. Gaseous Helium Reclamation at Rocket Test Systems

    SBC: Sierra Lobo, Inc.            Topic: T1001

    The ability to restore large amounts of vented gaseous helium (GHe) at rocket test sites preserves the GHe and reduces operating cost. The used GHe is vented into the atmosphere, is non-recoverable, and costs NASA millions dollars per year. Helium, which is non-renewable and irreplaceable once released into the atmosphere, is continuously consumed by rocket test facilities at NASA centers such a ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  9. Next-Generation Ion Thruster Design Tool to Support Future Space Missions

    SBC: TECH-X CORPORATION            Topic: T301

    Computational tools that accurately predict the performance of electric propulsion devices are highly desirable by NASA and the broader electric propulsion community. Large investments in running the long duration test programs (> 20 kHrs) at NASA GRC can be reduced with computer models and allow more focus on exploring the NEXT ion thruster design for future space missions. The current state of e ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  10. Enhanced Carbon Nanotube Ultracapacitors

    SBC: SCIENTIC INC            Topic: T601

    The proposed innovation utilizes carbon nanotubes (CNTs) coated with pseudo-capacitive MnO2 material as nano-composite electrode and ionic electrolyte for the construction of ultracapacitors. This novel approach of using nano-structured CNTs architectures provides high surface area of attachment of MnO2 nano-particles to maximize the charge efficiency and power capacity and to reduce series resist ...

    STTR Phase I 2010 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government