You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Power Balance Solver Enhanced by an Experimental Absorption Cross-Section Database

    SBC: Electro Magnetic Applications, Inc.            Topic: T5

    We propose the development of a user-friendly software tool for estimating the electric field distributions within spacecraft enclosures based on the Power Balance (PwB) method and enhanced by a database of experimentally determined Absorption Cross-Sections (ACS) of common equipment, components and cables.The software will be built around an already developed PwB solver that determines the statis ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  2. Energy and Velocity Analyzer for Distributions of Electric Rockets

    SBC: Plasma Controls, LLC            Topic: T2

    Plasma Controls, LLC (SBC) and Colorado State University (RI) will mature an energy and species plasma diagnostic for use with plasma thrusters. The combined Energy and Velocity Analyzer for Distributions of Electric Rockets, or the lsquo;E-VADERrsquo;, is needed especially for characterizing the plasma plume of Hall thrusters, where researchers desire to know ion energies and charged species frac ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  3. Testing of COTS Systems in Space

    SBC: Streamline Automation, LLC            Topic: T6

    For long duration space missions beyond LEO, the complexity of the missions and the latency of communications with Earth will require HPC systems that would be prohibitively expensive if qualified under traditional guidelines for high reliability space systems. There is a wealth COTS hardware that could potentially be used for HPC systems for non-critical tasks within heavily shielded spacecraft c ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  4. Hybrid Anode for Electrified Aircraft Propulsion

    SBC: Cornerstone Research Group, Incorporated            Topic: T15

    Electrified Aircraft Propulsion (EAP) research is part of NASA effort to improve aircraft fuel efficiency, emissions, and noise levels. New secondary battery chemistries are required to meet the 500 ndash; 700 Wh/kg cell level specific energy needs of UAM, all-electric helicopters and regional passenger aircraft. The cycle life, currently at asymp; 1500 ndash; 3000 cycles, also needs substantial i ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  5. Autonomous Navigation on Icy Moons and Ocean Worlds

    SBC: VETH RESEARCH ASSOCIATES LLC            Topic: T4

    Technology currently used for terrestrial navigation is extremely limited in the challenging environments on icy moons and ocean worlds such as Europa. Autonomous platforms used to collect data from beneath these ice and ocean surfaces cannot depend on access to satellite or any other electromagnetic communication. Autonomous systems in these environments are required to perform highly-complex tas ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  6. Braided Thin-Ply Tapes

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus proposes to develop braided thin ply composite tapes. The tapes will be braided from ultra-thin spread-tow unidirectional carbon and glass ribbons and will enable a new source and form factor for thin-ply textiles. The resulting tapes will be especially useful for thin high strain composite space deployable structures where they will allow bias plies in long parts without requiring seams. ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  7. Rapid Prototyping of Beam-Shaping Metamaterial Antennas via Additive Manufacturing of a Highly Conductive Filament

    SBC: Multi3D LLC            Topic: T8

    This NASA STTR Phase I proposal is aimed at rapid prototyping of antennas beam-shaping with metamaterials and metasurfaces through additive manufacturing of a highly conductive filament - Electrifi. The proposal includes the use of the highly conductive 3D printing filament, which was developed by Dr. Shengrong Ye, the principal investigator at the SBC - Multi3D and is at least 100 times more cond ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  8. Dual Mode Green Monopropellant Propulsion System for Interplanetary Missions

    SBC: Plasma Processes, LLC            Topic: T2

    Today many spacecraft carry two propulsion options: high thrust required for high acceleration maneuvers such as orbit insertion and rapid response; and low thrust required for station keeping and less critical maneuvers. A new class of non-toxic monopropellants, such as AF-M315E and LMP-103S, perform well in both high and low thrust regimes. Significant investments are maturing both monopropellan ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  9. Metagrating Beam Shaping Optics

    SBC: NANOHMICS INC            Topic: T8

    Metamaterial optics provide dramatic reductions in size and weight compared with traditional refractive optics. Nanohmics, Inc., and Andrea Alugrave;rsquo;s group at the City University of New York propose to develop ultrathin, light-weight, high-transmittance optics based on microfabricated gradient metagratings. A metagrating is an array of polarizable metamaterial particles with a period compar ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  10. Air Vehicle Gust Response analysis for Conceptual Design

    SBC: Research In Flight, LLC            Topic: T15

    Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...

    STTR Phase I 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government