You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Acoustic Reduction of Flow Separation

    SBC: LYNNTECH INC.            Topic: T201

    Airfoils produce more lift and less drag when the boundary layer is attached to the airfoil. With most aircraft there are combinations of airspeed and angle of attack where the boundary layer at least partially detaches from the airfoil. Reducing boundary layer detachment will increase lift and reduce drag. This will reduce fuel consumption saving money for the operator and improving control fo ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  2. Active Electromechanical Suspension System for Planetary Rovers

    SBC: BALCONES TECHNOLOGIES LLC            Topic: T102

    Balcones Technologies, LLC proposes to adapt actively controlled suspension technology developed by The University of Texas at Austin Center for Electromechanics (CEM) for high performance off-road vehicles to address STTR 2009-1 Subtopic T1.02, Information Technologies for Intelligent Planetary Robots. In particular, our team will develop a concept design for an actively controlled ElectroMechan ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. A Cubesat Hyperspectral Imager

    SBC: NANOHMICS INC            Topic: T801

    Mapping spectrometers have been extremely useful in multiple NASA applications, from Earth climate monitoring to identifying hydrocarbon lakes on Titan. Traditionally, imaging spectroscopy systems are not only heavy but also large in order to accommodate the long path lengths needed for spectral separation. There are several varieties, such as push-broom and scanning imaging spectrometers, but h ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  4. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: GEOPLASMA LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. Advanced Deposition Capability for Oxidation&Corrosion Protection Coatings

    SBC: Directed Vapor Technologies International, Inc.            Topic: T1201

    NASA's long range goals of reducing the fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing engine operation temperatures. As a result, the disk section is desired to operate in increasingly higher temperatures, which will subject it to additional degradation mechanisms of oxidation and hot corrosion. One approach to enhance the tem ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  6. Advanced Materials and Methods for Biospecimen Collection for Infectious Disease

    SBC: CERES NANOSCIENCES            Topic: ST12B001

    There is an urgent need for simple, reliable and effective tools for improved biospecimen collection, preservation and extraction of low-abundance analytes for improved detection and diagnostic assays. To address the DoD's need for clinical and field deployable biospecimen collection materials for infectious diseases, Ceres Nanosciences (Ceres) in collaboration with GMU's National Cente ...

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  7. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  8. A Flexible and Extensible Solution to Incorporating New RF Devices and Capabilities into EW/ ISR Networks

    SBC: SHARED SPECTRUM COMPANY            Topic: ST13A004

    The scientific/technical objective is to develop a language that will allow for seamless insertion of new RF devices and capabilities into EW/ISR networks. We achieve these requirements by employing subject matter experts that include former EW officers

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  9. Air Vehicle Gust Response analysis for Conceptual Design

    SBC: RESEARCH IN FLIGHT LLC            Topic: T15

    Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  10. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: Morningbird Media Corporation            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government