You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Large Eddy Simulation (LES) Flow Solver Suitable for Modeling Conjugate Heat Transfer

    SBC: Kord Technologies, Inc.            Topic: N19BT027

    Accurate prediction heat transfer in gas turbine components subject to cooling requires high fidelity modeling of heat transfer in the presence of high Reynolds number turbulent flow. The cooling internal to the blades results in sustained temperature gradients within the structural parts, from low temperature in the interior of the structure to increasingly higher temperature closer to the surfac ...

    STTR Phase I 2019 Department of DefenseNavy
  2. POC Blood Coagulopathy Monitor

    SBC: CFD Research Corporation            Topic: DHA19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  3. AI-Driven, Secure Navy Mission Planning via Deep Reinforcement Learning and Attribute-Based Multi-Level Security

    SBC: E H Group, Inc.            Topic: N19BT029

    Current mission planning systems allow strike planners and operations centers to perform time-sensitive strike planning, execution monitoring, and validate mission effects using XML-based tools that visualize time critical attack plan and track plan status vs. execution. In this proposed STTR Phase I design for the Next Generation Navy Mission Planning (NGNMPS) system, we will identify expanded op ...

    STTR Phase I 2019 Department of DefenseNavy
  4. A Hierarchical and Extendable, Component-Based Simulation Tool for Aircraft Thermal Management Systems

    SBC: CFD Research Corporation            Topic: N19BT025

    The requirements for thermal management on tactical aircraft systems have reached a level at which integrated system design must be considered early in the aircraft design process. An integrated propulsion, power and thermal modeling and simulation design approach is necessary for reduced size, weight and power requirements. At the same time, there is an urgent need for capabilities that enable an ...

    STTR Phase I 2019 Department of DefenseNavy
  5. HIGH STRENGTH, WATER-FILLED CERAMIC NANOCOMPOSITE MICROCAPSULES WITH LOW PERMEABILITY FOR SELF-SEALING FUEL BLADDERS

    SBC: Nanosonic Inc.            Topic: N19BT030

    During the proposed Navy STTR program, NanoSonic and Virginia Tech will design and synthesize innovative, high strength ceramic nanocomposite microcapsules filled with > 80 volume percent water that are empirically optimized to function as readily dispersed powdered additives with long-term water retention, durability during air craft bladder production, and rupture during ballistic shock. NanoSon ...

    STTR Phase I 2019 Department of DefenseNavy
  6. Robust, Low Permeability, Water-Filled Microcapsules

    SBC: Luna Innovations Incorporated            Topic: N19BT030

    The Navy is actively developing a self-sealing, water-activated fuel bladder to mitigate fuel leaks upon mechanical shock (e.g. penetration by a .50 caliber bullet). To circumvent the requirement of an external water source to activate the self-sealing, this system will require water-filled microcapsules that can be incorporated directly into the polymeric matrix of the fuel bladder. Upon mechanic ...

    STTR Phase I 2019 Department of DefenseNavy
  7. Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N18BT031

    For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...

    STTR Phase I 2019 Department of DefenseNavy
  8. Analysis of Dislocation Density, Recrystallization, and Residual Stress in 5XXX Aluminum using Laser Peening to mitigate Exfoliation Corrosion

    SBC: HEPBURN AND SONS LLC            Topic: N18AT016

    Hepburn and Sons LLC teaming with The Ohio State University, Center for Electron Microscopy and Analysis (CEMAS) propose to research and develop an innovative application of laser peening technology to mitigate exfoliation corrosion, a special type of inter-granular corrosion that occurs on the elongated grain boundaries. Strongly related, these Mg based alloys, when exposed to tensile stresses, c ...

    STTR Phase I 2018 Department of DefenseNavy
  9. Atomic Triaxial Magnetometer

    SBC: Vescent Photonics LLC            Topic: N19AT006

    Vescent Photonics and MIT Lincoln Labs (MIT-LL) propose to develop a quantum-based vector magnetometer with low size, weight, power, and cost (SWaP+C) for Navy applications. The proposed system will rely on probing magnetically-sensitive, atomic-like transitions of nitrogen-vacancy (NV) centers in diamond to provide stable, high-bandwidth readout of the vector magnetic field with sub-picotesla sen ...

    STTR Phase I 2019 Department of DefenseNavy
  10. Power-Dense Electrical Rotating Machines for Propulsion and Power Generation

    SBC: Continuous Solutions LLC            Topic: N19AT007

    The primary objective is to develop electric machine/drive topologies and power architectures that achieve the power densities required for 50% more power without the increase in weight or space requirements. In addition to PMSM-based designs, two new machine topologies will be considered. The first is a trapped flux coreless (TFC) machine that utilizes superconducting pucks made of YBCO to produc ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government