You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. An Integrated Optimization System for Lightening the Load of Warfighters

    SBC: CFD Research Corporation            Topic: N08T019

    Warfighters rely on technological equipment to ensure safety, mission effectiveness, and situational awareness. This equipment increases the capabilities of warfighters but also adds to their weight burden. This excess load could cause significant stress on the musculoskeletal system and lead to physiological deficits. The overall objective of the proposed project is to develop a system-level opti ...

    STTR Phase II 2009 Department of DefenseNavy
  2. A Novel Approach to Impregnating Structural Resin into Carbon Nanotube (CNT) Assemblies to Yield Ultrahigh-Loaded Polymer Nanocomposites

    SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC.            Topic: N08T017

    The primary objective of this program is the further development of ultrahigh-loaded carbon nanotube (CNT) polymer composites as next-generation structural materials. In Phase II, Composite Technology Development, Inc. (CTD) and The University of Texas at Dallas (UTD) propose significant advancements in material and process development, testing and characterization, and manufacturing toward a spec ...

    STTR Phase II 2009 Department of DefenseNavy
  3. Analysis & Adaptation of Advanced Fischer Tropsch Catalyst Structures and Resulting BOP Reductions to Fulfill Future Navy Fuel Needs

    SBC: INTRAMICRON INC            Topic: N07T027

    In the Phase I study, IntraMicron found that Microfibrous Entrapped Catalysts (MFEC) increased effective thermal conductivity by 3~12 times, improved selectivity and product yield, and significantly reduced the Balance of Plant (BOP) compared with packed beds; Ceramatec prepared novel catalysts for highly selective jet fuel production and designed a FTS modular reactor with fast external heat tran ...

    STTR Phase II 2009 Department of DefenseNavy
  4. Integrated Thermo-mechanical Processing, Microstructure and Property Simulation System for Aluminum Alloys

    SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION            Topic: N08T022

    The in-service lifetime of modern marine alloys (such as AA5083) has recently surpassed strength issues as the most significant interest of the US Navy concerning these materials. The principle factors limiting lifetime for these alloys are mass-loss due to corrosion, stress-corrosion cracking (SCC), toughness, and fatigue. Of these, corrosion is the most significant, mainly occurring due to prefe ...

    STTR Phase II 2009 Department of DefenseNavy
  5. Algorithms for Digital Wideband Receiver Design/Analysis for Electronic Attack

    SBC: Tsui Consulting            Topic: N07T006

    The objective of this program is to develop new algorithms for electronic warfare/attack digital receivers for the purpose of design and analysis. These advanced algorithms will provide improved performance and functionality including receiver sensitivity, instantaneous dynamic range, probability of intercept and multiple simultaneous signal handling capability.

    STTR Phase II 2009 Department of DefenseNavy
  6. Viscous Cartesian Flow Solver with AMR Capabilities for Automated Flow Simulation

    SBC: CFD Research Corporation            Topic: N08T008

    The goal of this project is to develop and leverage the novel Normal Ray Refinement (NRR) methodology investigated in Phase I, and to apply it to an efficient and robust prototype adaptive Cartesian solver for automated simulations of viscous flows. The NRR approach will provide a substantial reduction in the number of grid points in viscous boundary layers and will employ adaptive normal ray plac ...

    STTR Phase II 2009 Department of DefenseNavy
  7. Automated Human and System Performance Assessment in Operational Environments

    SBC: ADVANCED ANTI-TERROR TECHNOLOGIES CORP            Topic: N11AT001

    Our Fused-Realities-Assessments-Modules(FRAM) enables innovative new levels and types of automated quantification strategies for combining human and system performance in real-time for fused performance monitoring and after-action-review purposes. FRAM accomplishes this by fusing output of normative models of behaviors (cognitive/procedural/team), human states (physiological/affective), system sta ...

    STTR Phase II 2013 Department of DefenseNavy
  8. Synergistic MIMO Radar and Data Adaptive Signal Processing Experimentation

    SBC: INTEGRATED ADAPTIVE APPLICATIONS, INC            Topic: N11AT002

    The proposed work seeks to clearly demonstrate the advantage of the multiple-input multiple-output (MIMO) radar architecture over a similar single-input multiple-output (SIMO) or phased array system; the benefit of applying data-adaptive signal processing techniques in favor of their data-independent counterparts; and the utility of transmitting advanced probing waveforms as opposed to conventiona ...

    STTR Phase II 2013 Department of DefenseNavy
  9. Compact, Light Weight, Low Cost, Precision, Non-inertial Underwater Navigation Sensor

    SBC: ANALYSIS DESIGN & DIAGNOSTICS INC            Topic: N11AT027

    TBD

    STTR Phase II 2013 Department of DefenseNavy
  10. Wireless Torque Sensor for Condition Based Maintenance

    SBC: Albido Corporation            Topic: N11AT030

    In recent years, the need for highly reliable, durable and non-intrusive systems for monitoring the health condition of naval structures becomes more and more recognized. Of particular importance is the condition based maintenance of Navy rotating machinery (motors, generators, pumps, gear systems, etc.). Such Structural Health Monitoring (SHM) systems should be able to detect failures in their ea ...

    STTR Phase II 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government