You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Low Cost Alloys for Magnetocaloric Refrigeration

    SBC: GENERAL ENGINEERING & RESEARCH, L.L.C.            Topic: 12b

    Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

    STTR Phase II 2019 Department of Energy
  2. A Corrosion Test Station for Improved Characterization and Examination Capabilities of Advanced Nuclear Reactor Fuels and Materials

    SBC: Niowave, Inc.            Topic: 30i

    Liquid-metal coolants are one of the most promising solutions for the challenges of advanced high temperature nuclear reactor systems.They optimize heat transfer, neutronics, safety, and compactness of the reactor systems.Molten lead and lead-bismuth eutectic (LBE) are the primary coolant candidates due to their unique thermo-mechanical and neutronics properties.However, they are highly corrosive ...

    STTR Phase II 2019 Department of Energy
  3. High Power Ceramic Disk Lasers with Gradient Doping made by Direct Ink Writing

    SBC: Radiation Monitoring Devices, Inc.            Topic: 25c

    The power output of the high power lasers used in physics research is limited by the materials available for making gain media. Future increases in power require new and better materials. Operation at high power creates great thermal stresses that can lead to birefringence, thermal lensing or physical damage to the host. Effective cooling and small temperature gradients are critical for achieving ...

    STTR Phase II 2019 Department of Energy
  4. Development of Production Strains of Chlamydomonas using Breeding Technologies

    SBC: GLOBAL ALGAE INNOVATIONS, INC.            Topic: 08c

    In order to make large scale commercial production of microalgae based commodity food and fuel products, significant strides in algal productivity need to be achieved. With current regulatory guidelines, large scale outdoor cultivation of microalgae for these products restricts the use of transgenic algal strains, which in the laboratory thus far have been the primary strategy taken to effectively ...

    STTR Phase II 2019 Department of Energy
  5. High Performance Substrate Embedded Microgrids for High Efficiency, Flexible Organic Light Emitting Diodes

    SBC: Electroninks Incorporated            Topic: 09b

    Indium tin oxide (ITO) films are currently the most widely used transparent conductor in optoelectronic applications. However, ITO suffers from several major technological and economic limitations for large area applications such as inadequate performance, high cost, and brittleness. The primary objective of this Small Business Technology Transfer (STTR) Phase I/Phase II project is to develop the ...

    STTR Phase II 2019 Department of Energy
  6. Novel Treatment of Produced Waters from Shale Gas with Zero Liquid Discharge by Geothermal Heat

    SBC: SAVENGY TECHNOLOGIES., LLC            Topic: 17a

    Vast amounts of impaired waters are produced in gas and oil wells. Energy-efficient desalination systems are needed to treat these waters to produce fresh water and concentrated brines. Mineral recovery systems can also yield valuable critical materials as byproducts. Savengy Technologies and University of Central Florida (UCF) will develop and commercialize an energy efficient system to treat sha ...

    STTR Phase I 2019 Department of Energy
  7. New Crystalline Silicon Module Architecture to Reduce Costs withImproved Manufacturability andDurability

    SBC: Creative Light Source, Inc            Topic: 16a

    Direct Solar in partnership with Colorado State University's Next Generation PV Center (NGPV) and H. B. Fuller Company will develop a new solar module architecture and manufacturing process optimized for crystalline silicon (c-Si) modules that significantly reduces manufacturing costs and improves reliability. The outcome of this program will be a new c-Si module design, streamlined manufacturing ...

    STTR Phase I 2019 Department of Energy
  8. Integration of TRISO Fuel Particles with Open-Cell Foam for Increased Safety, Heat Transfer, and Fuel Performance

    SBC: Ultramet            Topic: 33b

    Tristructural isotropic (TRISO) fuel is a key component of advanced small modular nuclear fission reactors due to its inherent safety at high temperatures and irradiation levels and decreased proliferation risk relative to current reactor fuels. A more efficient cooling method for TRISO fuel compacts would increase heat transfer, allow for an increase in fuel density, and further improve accident ...

    STTR Phase I 2019 Department of Energy
  9. Pressure Vessel for TREAT Irradiation Vehicle

    SBC: ADVANCED POWDER SOLUTIONS INC            Topic: 33h

    DOE is trying to develop accident tolerant fuel and structural materials for future light water reactor (LWR). TREAT irradiation vehicle will be testing new accident-tolerant fuel for nuclear reactors. TREAT irradiation vehicle needs 718 alloy pressure vessel. Fabrication of pressure vessel by additive manufacturing 718 alloy is needed. But 100% dense component by AM fabrication process is difficu ...

    STTR Phase I 2019 Department of Energy
  10. Exploiting Acoustics for Subsurface Communication

    SBC: ALIEN SANDBOX LLC            Topic: 20b

    Reliable, safe, and robust storage of CO2 beneath the surface is important today and is expected to become even more critical in the coming decades. Safe storage requires knowledge regarding the dynamics and evolution of subsurface CO2 reservoirs. Temperature, pressure, and potentially other sensors are used to monitor important subsurface zones at various depths. An effective and relatively conve ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government