You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Repair of Materials Degradation in Light Water Reactor Components
SBC: UES SERVICES INC Topic: 08cCorrosion induced degradation of material components in the harsh environment of light water reactor can impact reactor reliability, availability, safe operation and eventually life. A possible remedy could be to replace the replaceable components at appropriate moments which may not be economically favorable. Thus there is a need to develop technologies to repair degraded materials. STATEMENT OF ...
STTR Phase II 2016 Department of Energy -
Low-cost, Time-resolved Chemical Characterization of Atmospheric Aerosols
SBC: AEROSOL DEVICES INC Topic: 23bThe composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...
STTR Phase II 2019 Department of Energy -
Permanent Magnet (PM) Induction Heater for Paraffin Abatement
SBC: AUSTIN GEOTECH SERVICES INC Topic: 20bThere are an estimated 1.7 million oil and gas wells in the United States, 771,000 of these are considered marginal producers. Combined they make up 11.3% of the US oil production and 8.3% of the US gas production. In that last 10 years, over 131,000 of these oil wells and 48,000 gas wells have been plugged and abandoned. Most of these wells suffer from paraffin plugging problems. The only way to ...
STTR Phase II 2019 Department of Energy -
Flow Battery Structures to Improve Performance and Reduce Manufacturing Cost
SBC: Faraday Technology, Inc. Topic: 21dRedox flow batteries are a promising technology for electrical energy storage for renewable energy sources; however traditional redox flow batteries are limited in their use due to non-uniform pressure drops and mass transfer limitations, as well as high manufacturing costs related to the felt material costs for the electrode and component alignment challenges during manufacturing.General Statemen ...
STTR Phase II 2013 Department of Energy -
Automated Solver Selection for Nuclear Engineering Simulations
SBC: RNET TECHNOLOGIES INC Topic: 32dAn important objective of the NEAMS program is to enable widespread use of the software tools among the industry, academia, and regulatory communities. For solving the problems occurring at various stages of NEAMS simulations, typically there are several possible choices for numerical subroutines. Furthermore, the best method for a numerical problem may also evolve over the course of the simulatio ...
STTR Phase II 2016 Department of Energy -
Low Cost HEA Anode for Distributed Reforming and Prevention of Carbon Deposition in SOFC(18-RD-987)
SBC: UES SERVICES INC Topic: 17bDirect Internal Reforming Solid Oxide Fuel Cells require an anode material with good catalytic reforming and electrochemical reactivity. Although the current state-of-the-art solid oxide fuel cell anode consisting of nickel and yttrium-stabilized zirconia (Ni-YSZ) has excellent catalytic properties and stability for the H2 oxidation at the usual operation conditions, the use of Ni-YSZ anode with c ...
STTR Phase II 2018 Department of Energy -
CORC; Cable Based High Field Hybrid Magnets for Future Colliders
SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC Topic: 26b"The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...
STTR Phase II 2018 Department of Energy -
Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process
SBC: HAZEN RESEARCH, INC. Topic: 14aTo increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...
STTR Phase II 2018 Department of Energy -
A Multi-channel Radiation-tolerant, Low-power, High-speed, and Resolution Analog-to-Digital Converter for Nuclear Physics Detectors
SBC: APOGEE SEMICONDUCTOR, INC. Topic: 28bCost-effective and power-efficient radiation tolerant semiconductors are needed in various harsh environments, such as particle detectors, communication satellites, high-altitude avionics and medical imagining equipment. These include amplifiers, voltage regulators, analog-to-digital converters (ADCs) and digital logic circuitry. However, radiation-tolerant high-speed ADCs currently cost more than ...
STTR Phase II 2019 Department of Energy -
High Performance Substrate Embedded Microgrids for High Efficiency, Flexible Organic Light Emitting Diodes
SBC: ELECTRONINKS INCORPORATED Topic: 09bIndium tin oxide (ITO) films are currently the most widely used transparent conductor in optoelectronic applications. However, ITO suffers from several major technological and economic limitations for large area applications such as inadequate performance, high cost, and brittleness. The primary objective of this Small Business Technology Transfer (STTR) Phase I/Phase II project is to develop the ...
STTR Phase II 2019 Department of Energy