You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Demonstration of a JP-8 Powered Compact ECU

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: OSD09T002

    Military shelters currently use electrically driven Environmental Control Units (ECUs) to provide cooling for the air inside the shelter. The ECU is vapor compression cycle powered by a diesel generator, operating on JP-8 fuel. Other than fueling jet engines, the largest drain on U.S. military fuel supplies in current operations comes from running generators at forward operating bases. In hot cli ...

    STTR Phase I 2010 Department of DefenseNavy
  2. MANERVA: Mission Assessment of Non-Manned Entities for Rating the Validation of Autonomy

    SBC: Charles River Analytics, Inc.            Topic: OSD09T004

    The dependability, persistence, and versatility of unmanned systems have made them indispensable assets in today’s warfighting. As they are tasked to fulfill new missions in unpredictable, dynamic environments, they are transitioning from remote control into the realm of autonomy. Here they perform rapid and semi-autonomous behaviors, such as re-planning and re-tasking, to accomplish mission obj ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Validation and Evaluation of Remote, Interactive Teams of Autonomous Systems (VERITAS)

    SBC: Aptima, Inc.            Topic: OSD09T004

    different modes, while using different combinations of subsystems. This presents a challenge for the personnel validating the system during design and development; the number of combinations of environments, modes, and subsystems is exponential. They cannot all be tested, so an optimal subset of tests must be run. We propose to develop VERITAS: Validation and Evaluation of Remote, Interactive Tea ...

    STTR Phase I 2010 Department of DefenseNavy
  4. Low-Cost Ball/Air/Magnetic Hybrid Bearing System for Extended-Life Micro Gas Turbine Engines

    SBC: Nastec, Inc.            Topic: N10AT037

    A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...

    STTR Phase I 2010 Department of DefenseNavy
  5. Developing a Detailed Chemical Kinetic Model for C-SiC-SiO2-Rubber Composite Materials Exposed to High Temperature, High Pressure, Oxidizing Environme

    SBC: Aerodyne Research, Inc.            Topic: N10AT005

    The objective of this proposed Small Business Technology Transfer (STTR) effort is to develop an experimentally-validated, highly detailed chemical kinetic reference model of surface chemistry for C-SiC-SiO2 rubber composite materials exposed to high temperature, high pressure, oxidizing environments. This reference model will then be reduced into simplified reduced-order models that could be easi ...

    STTR Phase I 2010 Department of DefenseNavy
  6. Development of Surface Reaction Mechanism for C-SiC-SiO2-Rubber Composite Oxidation in Extreme Oxidizing Condition

    SBC: CFD Research Corporation            Topic: N10AT005

    The purpose of this STTR is to develop comprehensive detailed kinetics for oxidation of C-SiC-SiO2-rubber in extreme oxidizing environment. This material is used as a coating on the outer surface of Navy weapon systems. In order to predict the fate of this material under extreme conditions and mitigate the degradation of the coating, a comprehensive oxidation mechanism is required. In Phase I, CFD ...

    STTR Phase I 2010 Department of DefenseNavy
  7. Analysis and Modeling of Foreign Object Damage (FOD) in Ceramic Matrix Composites (CMCs)

    SBC: N&R ENGNERING MGT SUPPORT SVCS            Topic: N10AT010

    The Phase I deliverable will be a physic-based model which represents a CMC gas turbine component concomitantly at the material level and the structural level. This model will be probabilistically analyzed to account for the uncertainties in material properties and the uncertainties in the size and impact velocities of possible foreign objects (FOD). A ceramic material must display sufficient capa ...

    STTR Phase I 2010 Department of DefenseNavy
  8. Innovative Approaches to Resource Virtualization over Ad-Hoc Wireless Networks

    SBC: Infoscitex Corporation            Topic: N10AT006

    Resource virtualization concepts are in heavy commercial use for optimizing the performance of distributed applications. Resource virtualization allows resources to be allocated and adapted on-the-fly, and enables a wide range of distributed computing, networking, and sensing applications. However, resource virtualization has traditionally been developed for fixed, stable networks, and cannot adeq ...

    STTR Phase I 2010 Department of DefenseNavy
  9. Development of a Computational Method for Prediction of After-Burning Effect

    SBC: BUSA Engineering Consulting            Topic: N10AT002

    This proposal is being submitted in response to the solicitation topic N10A-T002 (Development of a Computational Method for Prediction of After Burning Effect) by BUSA Engineering Consulting (Dr. Jianghui Chao) in collaboration with University of Florida (PI: Prof. S. Balachandar). The overall objective of the proposed effort is to contribute to national defense and security by advancing the state ...

    STTR Phase I 2010 Department of DefenseNavy
  10. Advanced Materials for the Design of Lightweight JP5/JP8/DS2 Fueled Engines for Unmanned Aerial Vehicles (UAVs)

    SBC: Northwest Uld, Inc.            Topic: N10AT001

    Northwest UAV Propulsion Systems proposes using our purpose built heavy fuel engine designed and built in the USA for small unmanned aerial systems in the tier 2 & 3 class. We will be adding a lightweight ceramic material set combined with FEA (Finite Element Analysis) and heavy fuel atomizer (IRAD Project) to create a lightweight engine for a SUAS or STUAS class UAVs. The Ceramic material set is ...

    STTR Phase I 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government