You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Low Cost OPAM for sea mine detection

    SBC: QUSPIN INC.            Topic: N17AT013

    Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...

    STTR Phase I 2017 Department of DefenseNavy
  2. SWAT- Scalable W(R)ubber through Advanced Technology

    SBC: EnergyEne Inc.            Topic: ST18C001

    Opportunity: Guayule, a US native plant, is the only alternate rubber crop with an established, mechanized, agronomic system. Problem: Low rubber yields and lack of effective resin and bagasse coproduct valorization, have prevented widespread adoption by American farmers and processors. Rubber is only made when the cytoplasmic monomer pool (isopentenyl-pyrophosphate; IPP) is larger than that requi ...

    STTR Phase I 2019 Department of DefenseDefense Advanced Research Projects Agency
  3. Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS)

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: N17AT030

    Optonicus proposes development of the WALAM-ABS (Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...

    STTR Phase I 2017 Department of DefenseNavy
  4. Physics-based Computationally Efficient Spray Combustion Models for LES of Multiphase Reacting Flows

    SBC: CFD Research Corporation            Topic: N17AT002

    One important challenge for the reliable prediction of liquid fuel effects on the combustion in aviation combustors and augmentors is the accurate modeling of underlying physical processes, involving the evaporation of fuels, preferential vaporization, scalar mixing and ignition. LES methodologies are required to accurately capture these transient and inherently unsteady combustion processes. In t ...

    STTR Phase I 2017 Department of DefenseNavy
  5. Assess Stability and Anti-Fragility of Dense Urban Terrains

    SBC: Cordillera Applications Group, Inc.            Topic: ST17C003

    The objective of this proposal is to examine the feasibility of defining and measuring key dimensions of an urban system to include its essential functions and networks, and whether they can be modelled in a computational framework for assessing robustness and resilience of DUTs (and their tipping points) under conditions of volatility and stress. This proposal will conduct a comprehensive review ...

    STTR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  6. POC Blood Coagulopathy Monitor

    SBC: CFD Research Corporation            Topic: DHA19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Program
  7. Signature Management Textiles

    SBC: Cornerstone Research Group, Incorporated            Topic: A18BT023

    The prolific nature of Advanced Battlefield and Ground surveillance radar (BSR/GSR) in military markets is driving the need to develop new methods of reducing infantry forces’ radar cross section (RCS) in effort to avoid detection and more freely move throughout the battlespace. One approach to combat the growing threat of BSR/GSR surveillance is through the development of advanced textiles that ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Soft and Elastomeric Intramuscular Electrode with Therapeutic Delivery Capability

    SBC: TDA Research, Inc.            Topic: A13AT019

    Approximately 5-6% of military injuries involve some form of major peripheral nerve injury with little chance of spontaneous healing. Currently these injuries lead to major impairment of voluntary muscle function in the limbs and extremities, making tasks of walking, reaching, grasping, etc. very difficult or impossible for many patients. It is not enough to focus therapeutic treatment on the se ...

    STTR Phase I 2013 Department of DefenseArmy
  9. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

    STTR Phase I 2018 Department of DefenseDefense Health Program
  10. PRIME: PRimary Integration and Maturation of EGS

    SBC: THE DESIGN KNOWLEDGE COMPANY            Topic: AF18BT012

    Legacy satellite command and control capabilities and their related telemetry operate in a largely stove piped framework. Satellites are still commanded, controlled, and communicated with their ground station in a specific constellation structure. Each ground station is unique to a given constellation and the communications and telemetry are aligned to the specific constellation, underscoring an o ...

    STTR Phase I 2019 Department of DefenseAir Force
US Flag An Official Website of the United States Government