Award Data

The Giner, Inc. Phase II program will implement a the Hybrid Sensor Array (HSA) working prototype based on sensor development and pulsed operating conditions developed in Phase I. The HSA uses combinations of semiconductor doped metal oxide materials developed at Giner, Inc. together with organometallic material developed at the University of California at San Diego (UCSD). The electronic proper ...

ABSTRACT: EDEN PARK ILLUMINATION, INC. and the University of Illinois have formed a team to pursue the demonstration and commercialization of large arrays of microcavity plasmas capable of producing white light panels with luminous efficacies above 30 lumens/W. This proposed project will demonstrate the ability of arrays of microplasmas to yield flat lamps of high efficiency, luminance, and col ...

The objectives of this Phase-II research effort is focused on transitioning noninvasive diagnostic techniques based on ultrafast lasers for characterizing nanoenergetic materials and their performance in rocket engine environments. Through the use of ultrafast laser imaging and spectroscopy, it is possible to isolate and characterize each physical process from initiation through energy release an ...

In collaboration with Sandia National Laboratory, Physical Sciences Inc (PSI) proposes to design, develop, and demonstrate a Frequency Agile Terahertz Sensor (FATS) for trace explosives residue detection. The critical frequency agile terahertz (THz) detector is based on an electronically tunable plasmonic grating-gate technology developed by our collaborators at Sandia. Phase I will further impr ...

This Small Business Technology Transfer Phase I project will develop ultradense, low-power plasmonic integration components and devices for on-chip manipulation and processing of optical signals. Both passive and active components will be studied. Detailed performance predictions will be obtained through finite element modeling (FEM) of the harmonic Maxwell’s equations. The FEM provides detai ...

Microscale, Inc. in collaborating with New Jersey Institute of Technology proposes to develop an innovative silicon nanomembrane mirror (SiNM) technology for adaptive optics by using a novel low cost and hierarchically-dimensioned multilevel SiNMs integration design.This proposed Phase I effort continues to bridge the gap between the present state of development of SiNM mirror technology and the p ...

We propose to develop a combination Tip-Enhanced Raman Scattering and Shear-Force Microscopy (TERS-SFM) instrument to study the composition and morphology of nanoparticles, surfaces, and biofilms on any substrate material. The instrument developed during Phase I will rely upon Scanning Tunneling Microscopy combined with TERS (TERS-STM) to test the effects of various excitation wavelengths and tip ...

Industrial Control Systems (ICS) are critical elements in electrical, water, oil/gas, and manufacturing services involving supervisory control and data acquisition (SCADA), distributed control systems (DCS), and programmable logic controllers (PLCs). These systems allow operators to monitor sensor data and remotely control field devices. Initially, these devices were designed for closed-network or ...

This Small Business Technology Transfer Research phase I program will develop a new class of surface plasmon enhanced photovoltaic devices that exhibit increased current collection. Photon management, the manipulation of the incident optical field to increase the probability that a photon is absorbed in the active region of the cell, is critical to the development of next generation thin film sol ...

The Air Force has expressed an interest in identification and evaluation of nanoscale device architectures capable of functional logical operation in a VLSI format. However, fundamental limits prevent straightforward extension of optical lithography to nanoscaled device fabrication. Non-conventional lithography techniques such as x-ray and particle based methods (e.g., electron beam lithography) p ...