List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Airworthy Cable Angle Measurement System For Slung Load Operations

    SBC: Advanced Optical Systems, Inc            Topic: A09013

    Advanced Optical Systems, Inc. (AOS) has developed and demonstrated the Cable Angle Measurement System, a low-cost, accurate system for measuring a helicopter’s load position and motion at the end of an external sling. By using a camera, an LED target, and custom electronics, the AOS system measures the load’s angle with better than 0.1° accuracy across a 150° field of view and with 0.1°/s ...

    SBIR Phase II 2010 Department of DefenseArmy
  2. Antimicrobial Coatings for Medical Shelters

    SBC: AKRON POLYMER SYSTEMS, INC.            Topic: A09168

    Approximately 2 million infections are acquired in hospitals annually with a major source of bacterial contamination being frequently touched common surfaces. This problem also exists for Combat Surgical Hospitals. Current anti-bacterial coatings are not suitable for these environments because of human toxicity, low activity, and/or poor adhesion. The goal of this project is to develop a low cost, ...

    SBIR Phase I 2010 Department of DefenseArmy
  3. Fatigue Life Modeling & Simulation of Elastomer-Polymer Materials

    SBC: AKRON RUBBER DEVELOPMENT LABORATORY,INCORPORATED            Topic: A09198

    High operating temperatures and harsh environments have caused a significant decrease in elastomeric material durability for military vehicles. ARDL will be using recent advances in material technology, testing methodology, processing, and design-analysis concepts to develop the material model and meet the project goal. Material choices and test designs will be established based on the requirement ...

    SBIR Phase I 2010 Department of DefenseArmy
  4. Nano-scale Silicon-Carbon Anodes for High Capacity Lithium Ion Batteries

    SBC: Applied Sciences            Topic: A09175

    Equipment and ordnance in the Defense arsenal have become increasingly more sophisticated, ranging from complex electronic systems for surveillance, hybrid vehicles, portable soldier systems, unmanned aerospace and underwater vehicles, to directed energy weapons systems with high pulse power demand. These systems are increasingly more reliant on battery power having reduced operating cost and life ...

    SBIR Phase I 2010 Department of DefenseArmy
  5. Rechargeable, High Energy Density, Lithium-Air Batteries

    SBC: Applied Sciences            Topic: A10139

    Many defense systems such as silent watch, soldier power, unmanned vehicles, communications equipment, and directed energy weapons require portable power which limits the duration and capability of missions relying upon these systems. The DoD is therefore seeking energy storage devices with higher energy densities to extend mission duration and capability. Of all battery technologies currently a ...

    SBIR Phase I 2010 Department of DefenseArmy
  6. Innovative Tantalum Machining for Weapon Applications

    SBC: ARES, INC.            Topic: A08044

    Gun barrel bores have been traditionally plated with chromium to reduce erosion and increase barrel life. However, the chrome electro deposition process generates hazardous waste and the DoD has been moving to eliminate its use. Liners made from Tantalum-Tungsten (Ta-W) alloys have been shown to be an acceptable substitute. These alloys have a high melting temperature, are more erosion resistant t ...

    SBIR Phase II 2010 Department of DefenseArmy
  7. Cross-compatible cartridge case for orthodox or rarefaction wave gun firing

    SBC: ARES, INC.            Topic: A10042

    RAVEN technology weapons vent a significant portion of the propellant gases rearward. Therefore the ammunition must allow the gun gases to leave the chamber at the proper time. This is in complete contrast to conventional weapons where the ammunition provides the breech seal during the entire ballistic cycle. As such, the technologies are incompatible and separate supply logistics must be main ...

    SBIR Phase I 2010 Department of DefenseArmy
  8. An Automated, High Throughput, Filter-Free Pathogen Preconcentrator

    SBC: CFD Research Corporation            Topic: A10AT016

    Accurate real-time waterborne pathogen detection is of paramount importance to security of U.S. military forces and installations. Fieldable high-throughput pathogen concentration is a critical analytical need for enhanced detection performance. Existing concentration methods are time-consuming, bulky, labor-intensive, power- and reagent-hungry, and consequently ill-suited for battlefield deployme ...

    STTR Phase I 2010 Department of DefenseArmy
  9. Microfluidic Yeast-based Impedance Sensor for Food Monitoring

    SBC: CFD Research Corporation            Topic: OSD09H24

    Current methods for detecting toxicity in food are labor intensive, time-consuming and require access to sophisticated laboratory equipment. To overcome these limitations we propose to develop a novel, microfluidics yeast-based sensor system for detection of Toxic Industrial Chemicals (TICs) in food. Robust yeast cell wires and membrane patches will be assembled on-demand and in-situ from suspensi ...

    SBIR Phase I 2010 Department of DefenseArmy
  10. Model based analysis of sleep-wake cycle for early detection of mild TBI

    SBC: CFD Research Corporation            Topic: OSD09H08

    The goal of this project is to develop a computational algorithm/model to detect subtle changes in neurobiology of sleep-wake cycle due to mild TBI. We aim to quantify early enough the subtle changes in sleep-wake disorder by correlating objective sleep quality measurements as model inputs to the “Injury Leonardo” framework that

    SBIR Phase I 2010 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government