You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Digital Analysis Computing Software Solutions for the Supply Chain
SBC: ALTASIM TECHNOLOGIES LLC Topic: SB092006Electrical circuit designers at Tier 2-4 suppliers to the Department of Defense (DoD) are currently using desktop computing to design their products. To improve the circuit design in the DoD supply chain, designers will need to be able to analyze their circuits with High Performance Computing resources. Designers seeking to innovate their circuits must have access to HPC facilities that maintain c ...
SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency -
Establishing Cavitation as a Damage Mechanism for Traumatic Brain Injury (TBI) from an Improvised Explosive Device (IED) Blast
SBC: ADVANCED TECHNOLOGY AND RESEARCH CORPORATION Topic: SB082007A leading risk facing the warfighter is from an improvised explosive device (IED) causing traumatic brain injury (TBI). The objective of this research is to develop mathematical tools to accurately predict stresses, strain and cavitation from blast overpressure that contribute to TBI and to develop mitigation technologies. Phase I showed that significant progress was made in establishing the appli ...
SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency -
Photonic Band Gap Structures for Solar Energy Generation
SBC: Aegis Technologies Group, LLC, The Topic: SB092002The demand for renewable energy is motivating R&D efforts toward the development of novel photovoltaic (PV) technology. Efficient and low cost solar cells will have an important role in defense applications particularly powering portable electronic devices. Current solar cells based on single crystal silicon are still not at a level to be cost effective when compared to other forms of electrical g ...
SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency -
Nanotechnology-Enhanced Sensor for Toxic Industrial Chemicals
SBC: STREAMLINE AUTOMATION LLC Topic: SB072001Chlorine gas was first used as a weapon during World War I, and reemerged as a threat in Iraq compounding the dangers from existing improvised explosive devices. One of the significant challenges with preventing attacks that involve toxic industrial chemicals (TICs) like chlorine and ammonia is that they have genuine civilian uses for water treatment, in refrigeration systems, and other applicatio ...
SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency -
Modeling, Design and Development of Micrometer Wave Energy Harvester Using Rectenna Arrays
SBC: COOLCAD ELECTRONICS, LLC Topic: SB092010We propose to directly harvest energy from infrared (3-14microns) radiation sources using micro-antennas coupled to rectifying diodes and storage capacitors. The antenna receives infrared electromagnetic radiation and the rectifier converts it to direct current which is then stored. Large numbers of these rectennas connected in a conformal, light-weight array should be able to harvest energy suffi ...
SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency -
A Novel MHD Power Generation and Energy Storage Concept for Re-Entry Vehicles
SBC: LYTEC LLC Topic: SB093014An innovate re-entry power system is proposed for development which collects the re-entry energy for a vehicle/module entering the atmosphere for LEO using an MHD power generator that is configured on the exterior surface of the vehicle nose to utilize the heated air sheath as the plasma for promoting the MHD power process. The MHD power produced is collect in an internal energy storage system tha ...
SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency -
Innovative photon counting receivers for bio-photonic & QKD applications
SBC: Epitaxial Technologies, LLC Topic: SB082007FThe overall objective of the proposed SBIR program is to develop ultra low noise avalanche photodiodes (APDs) with high multiplication gain that will enable for the first time photoreceivers with high single photon detection probability, ultra-low dark count rate and low timing jitter. The goal of Phase II will be to use innovative combinations of APD material structure design, material growth and ...
SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency -
A Spectrally Dynamic Berth Light for Active Circadian Cycle Management
SBC: Energy Focus, Inc. Topic: SB082055A significant amount of personal injury and property damage as well as lost productivity could be avoided by speeding up the body’s adjustment cycle to new circadian schedules or re-synchronizing body schedules that have slipped or advanced. For the military, this problem is especially acute because the warfighters’ duties include dangerous equipment and a need for 24-hour operational readine ...
SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency -
Explosion-Proof Solid State Lighting Fixture for Extreme Environments
SBC: Energy Focus, Inc. Topic: SB082054Within harsh environment areas, Naval vessels require illumination. Incandescent based Symbol 48.2 explosion-proof fixtures are rated to operate in these spaces but are inefficient, resulting in unsafe fixture surface temperatures and unnecessarily high energy consumption. Under such extreme operating conditions, the lamps in the fixtures fail frequently, leading to high maintenance costs. Prod ...
SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency -
Integrated Airframe System
SBC: GLOYER-TAYLOR LABORATORIES INC Topic: SB091013Building upon the successful Phase I demonstration of the feasibility of the Blended Hybrid Laminate (BHL) technology, the Phase II effort will seek to demonstrate and validate the technology at a relevant scale. Phase II confirmation of high cryo-pressure cycle life and high structural performance will open the door to the application of the technology to future high performance rockets, such as ...
SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency