List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Creating Resilient Structures with Polymer Coatings

    SBC: Optechnology, Inc.            Topic: 819S

      The first goal of our team is to design and develop highly ductile cement mortar composites using novel patent applied for technology which has been shown to produce materials with high energy absorption, decreased modulus, higher tensile strength, and greater toughness than standard or ultra high performance concretes or fibercements. These materials will be used to produce NEMA Class ...

    SBIR Phase II 2010 Department of Commerce
  2. A Magic Ring Field Source for Magnetic Refrigeration

    SBC: Alabama Cryogenic Engineering, Inc.            Topic: N/A

    The proposed effort covers the engineering aspects of a magnetic field source to be used in a table-top demonstrator of magnetic refrigeration. A prototype magnetic field source, based on the Halbach or "magic-ring" concept, will be designed, constructed and tested in the Phase I effort. The proposed device is based on an innovative concept that is simpler than current magic-ring configurations. ...

    SBIR Phase I 1995 Department of Commerce
  3. Prediction of Equivalent System Temperature: A Computer Methodology

    SBC: Applied Data Trends, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  4. Electrostatic Atomization for Industrial Spray Combustion

    SBC: CFD Research Corporation            Topic: N/A

    The proposed electrostatic atomization process has been successfully applied within the diesel injection and paint spray industries to generate a priori specifiable droplet-size distributions with near uniform droplet dispersivity. Energetically efficient droplet development with electronically controlled uniform mean droplet sizes between 10 and 100 um range have been demonstrated, with range ex ...

    SBIR Phase I 1995 Department of Commerce
  5. Electronic Specification Interchange

    SBC: RENAISSANCE SERVICES            Topic: N/A

    While much of the data involved in product and order definition has been captured in standard electronic structures such as STEP and EDI, material and process specifications are still handled as amorphous paper-based documents. The use of manual, paper-based specifications is an extremely labor-intensive and time-consuming process. Specifications are an integral part of the product definition pr ...

    SBIR Phase I 1995 Department of Commerce
  6. Parallel Algorithms and Infrastructure for Information Technology

    SBC: SYSTRAN FEDERAL CORP.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  7. Body Orientation Sensor System (BOSS)

    SBC: Archangel Systems, Inc.            Topic: 07NH1

    The objective of this work is to develop a low cost 6 DOF body tracking system to monitor the orientations of an occupants and pedestrians as well as vehicle kinematics in vehicular impact tests. This tracker system can be standalone or part of a subsystem that can communicate with other trackers and external computer via serial, USB and/or Bluetooth interface. The proposed tracker coined Body O ...

    SBIR Phase I 2008 Department of Transportation
  8. Design, Development and Testing of Optimized Composite "Soft Crack Arrestors"

    SBC: ENGINEERING MECHANICS CORPORATION OF COLUMBUS            Topic: 07PH1

    Emc2's proposal provided to DOT in response to SBIR Research topic 07-PH1 on "Design Optimization for Soft Crack Arrestors" focuses on the development of key material property data needed to design "soft crack arrestors". This testing will be done over a range of temperatures to cover extreme conditions for future pipeline designs. It is also essential to develop this data at the loading rates t ...

    SBIR Phase I 2008 Department of Transportation
  9. Dynamic Non-contact 3D Measurement System for Rollover Testing

    SBC: Photon-x, Inc.            Topic: 07NH2

    Photon-X is proposing to develop an innovative dynamic 3D roof imaging system to monitor vehicle roof deformation during vehicle rollover testing. The 3D imaging system will capture real-time dynamic motion of the roof and vehicle occupants for playback analysis or modeling to enhance overall safety in rollover crashes. The system will provide photographic resolution 3D imagery with the ability ...

    SBIR Phase I 2008 Department of Transportation
  10. Next Generation Energy Efficient Supplemental Lighting for Plant Production

    SBC: CYCLOPTICS TECHNOLOGIES, LLC            Topic: 813

    Greenhouse farming is an absolute necessity to revive and create local agriculture industries in northern climatically challenged regions with short growing seasons. Controlled Environment Agriculture (CEA) has made significant strides in greenhouse farming technology. State of the art CEA farming utilizes direct control of lighting, temperature and CO2 in a hydroponics environment. Key advantages ...

    SBIR Phase II 2010 Department of Agriculture

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government