You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Source Approval and Low Rate Production of the Valve Piston (4810-01-269-4808)

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA183006

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) to facilitate NESO in supporting the needs of the U.S. Air Force and U.S. Navy nuclear communities. Mainstream Engineering has carefully reviewed the technical data package for NSN 4810-01-269-4808 provided in the solicitation and is confident that we possess the manufacturing capability, quality manage ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  2. Production and Source Approval for NSN 5305-01-417-8566 Socket Cap Screw

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA183009

    The Defense Logistics Agency aims to improve product availability and increase competition on a multitude of NSN items for the Nuclear Enterprise Support Office by introducing capable, small business suppliers through the Source Approval Request (SAR) process. Addition of approved sources for these critical/weapon system items can lead to reduced cost and decreased lead times. Expediting the procu ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  3. Production and Source Approval for NSN 5305-01-661-8323 Shoulder Screw

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA183010

    The Defense Logistics Agency aims to improve product availability and increase competition on a multitude of NSN items for the Nuclear Enterprise Support Office by introducing capable, small business suppliers through the Source Approval Request process. Addition of approved sources for these critical/weapon system items can lead to reduced cost and decreased lead times. Expediting the procurement ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  4. Grave to Cradle: Establishing a Domestic Capability to Recover & Recycle Critical Metals from Defense & Industrial Scrap

    SBC: 6K Inc            Topic: DLA183013

    There is constrained domestic availability of strategic metals, superalloys or titanium for example, unacceptably exposing the US military to dependency on foreign sources. A near-term solution is found in the nation’s boneyards, MRO facilities, and machine shops. End of life parts, machine shop scrap, or used powders, represent an untapped source of strategic metals that can provide the US mili ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  5. Laser-Aided Automated Removal of Anti-Reflective Coatings From Germanium Substrates

    SBC: ADA Technologies, Inc.            Topic: DLA183015

    High-purity germanium (Ge) is manufactured into infrared (IR) lenses for most DoD night sight IR optics, thermal imaging systems, and IR tracking systems in combat vehicles. A recent report by Umicore (ADA’s partner for this proposed project) identifies several current and future needs for Ge, showing growing needs in the middle of severe shortfall. These applications are essential for tracking ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  6. Rapid Sourcing for Critical ALRE Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172001

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI). Ten ALRE National Stock Number (NSN) items were identified with annual demand values over $10,000 with two or fewer approved sources.Mainstream Engineering has carefully reviewed the ten NSNs provided ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Cost and Lead Time Reduction for Hard to Source Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172002

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Land and Maritime Hard to Source Items (HSIs). Three National Stock Number (NSN) / part number (PN) combinations were identified with annual demand values over $10,000 with fewer than two approved sources.Mainstream Engineering has carefully reviewed the NSN/PN combinations provided in the solicitat ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Augmented Reality (AR) within the Defense Logistics Agency (DLA)

    SBC: Boston Engineering Corporation            Topic: DLA181001

    The Defense Logistics Agency (DLA) believes there may be advantages to using Augmented Reality (AR) technologies, including the associated benefits of Internet of Things (IoT) capabilities, for improving procurement, logistics and distribution processes in its operations today. Commercial businesses around the world are proving gains in reliability, repeatability, and reduced process costs in all ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government