You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Deposition Capability for Oxidation&Corrosion Protection Coatings

    SBC: Directed Vapor Technologies International, Inc.            Topic: T1201

    NASA's long range goals of reducing the fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing engine operation temperatures. As a result, the disk section is desired to operate in increasingly higher temperatures, which will subject it to additional degradation mechanisms of oxidation and hot corrosion. One approach to enhance the tem ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  2. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Air Vehicle Gust Response analysis for Conceptual Design

    SBC: RESEARCH IN FLIGHT LLC            Topic: T15

    Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  4. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: Morningbird Media Corporation            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  5. Automated In-situ Large-area De-processing of ICs with High Throughput

    SBC: MICRONET SOLUTIONS INC.            Topic: DMEA18B001

    The objective of this proposal is to demonstrate the feasibility of producing an automated delayering and imaging system with end point detection, material density detection with built in neural network error correction. This process, coined fast Automated Delayering-Image Capture System (ADICS) leverages off of the existing Pix2Net which is a proven automated imaging 3D microchip reconstruction ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  6. Autonomous Navigation on Icy Moons and Ocean Worlds

    SBC: VETH RESEARCH ASSOCIATES, LLC            Topic: T4

    Technology currently used for terrestrial navigation is extremely limited in the challenging environments on icy moons and ocean worlds such as Europa. Autonomous platforms used to collect data from beneath these ice and ocean surfaces cannot depend on access to satellite or any other electromagnetic communication. Autonomous systems in these environments are required to perform highly-complex tas ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  7. Bi-Metallic Additive Manufacturing Close-Out of Coolant Channels for Large Liquid Rocket Engine (LRE) Nozzles

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T1204

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing methods. Copper to Nickel alloy interface strength will be quantified and metallurgical characterization completed. A thermal model based on Rosenthal?s analytical expression for a moving heat source, which has ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  8. Braided Thin-Ply Tapes

    SBC: OPTERUS RESEARCH AND DEVELOPMENT, INC            Topic: T12

    Opterus proposes to develop braided thin ply composite tapes. The tapes will be braided from ultra-thin spread-tow unidirectional carbon and glass ribbons and will enable a new source and form factor for thin-ply textiles. The resulting tapes will be especially useful for thin high strain composite space deployable structures where they will allow bias plies in long parts without requiring seams. ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  9. Computerized Robotic Delayering and Polishing System

    SBC: SPECTRAL ENERGIES LLC            Topic: DMEA18B001

    The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could hel ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  10. Concurrent High-Fidelity Measurements and Simulations for Advancing the Design of Rotating Detonation Engines

    SBC: SPECTRAL ENERGIES LLC            Topic: T2

    Rotating Detonation Engine (RDE) design is challenging due to the lack of in-depth understanding of many key mixing and combustion processes. The RDE flow field is a nonuniform mixture of fuel and oxidizer concentrations with strong injector effects, large turbulence effects, multiple shockwaves, and shear layers. These inhomogeneities can lead to significant combustion inefficiencies which have a ...

    STTR Phase I 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government