You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  2. Innovative Methodologies for Manufacturing of Lethality Test Articles

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost. However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat target ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  3. Improving Analysis of Large Multidimensional Data through Parallel Processing & Explorative Visualization

    SBC: Frontier Technology Inc.            Topic: MDA18T001

    Using a combination of parallel processing and explorative visualization, a new and exciting solution for high-performance visual analysis of large multidimensional data is proposed. Steady volume flows are selected to demonstrate the strategy, methodology, techniques, and functionalities. Virtual Reality (VR) and Augmented Reality (AR) platforms will be adopted to unleash the power of explorative ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  4. Carbon nanotube coatings on electrochemical textured surfaces for advanced adsorptive baffles

    SBC: Faraday Technology, Inc.            Topic: MDA18T003

    This proposed STTR program addresses the challenge of developing advanced absorptive baffles to minimize stray and reflected light across the visible and infrared wavebands for exo-atmospheric optical sensors and seeker telescopes. To achieve this goal Faraday Technology and Pacific Northwest National Laboratory will develop electrochemically textured pyramidal surfaces with CNT black coatings as ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  5. Storable Clean Ethane/ethylene Nitrous Engine (SCENE)

    SBC: PIONEER ASTRONAUTICS            Topic: MDA18T005

    he Storable Clean Ethane-ethylene Nitrous Engine (SCENE) is a proposed technology designed to provide upper stages and spacecraft with non-toxic, liquid, non-cryogenic, high-performance propulsion with an Isp on the order of 300 seconds. The propellant components are stored as liquids under their saturated vapor pressures. With the SCENE, nitrous oxide is used as an autogenously pressurized oxidiz ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  6. Non-Intrusive Uncertainty Identification and Quantification Framework for Hypersonic Flights

    SBC: CFD Research Corporation            Topic: MDA18T006

    Uncertainty Reduction in High Speed Flight Vehicle Modeling | Approved for Public Release 18-MDA-9707 (3 Jul 18)

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  7. Computerized Robotic Delayering and Polishing System

    SBC: Spectral Energies, LLC            Topic: DMEA18B001

    The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could hel ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  8. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  9. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: X-Wave Innovations, Inc.            Topic: DLA18A001

    Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government