You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Improving Analysis of Large Multidimensional Data through Parallel Processing & Explorative Visualization
SBC: Frontier Technology Inc. Topic: MDA18T001Using a combination of parallel processing and explorative visualization, a new and exciting solution for high-performance visual analysis of large multidimensional data is proposed. Steady volume flows are selected to demonstrate the strategy, methodology, techniques, and functionalities. Virtual Reality (VR) and Augmented Reality (AR) platforms will be adopted to unleash the power of explorative ...
STTR Phase I 2019 Department of DefenseMissile Defense Agency -
Carbon nanotube coatings on electrochemical textured surfaces for advanced adsorptive baffles
SBC: Faraday Technology, Inc. Topic: MDA18T003This proposed STTR program addresses the challenge of developing advanced absorptive baffles to minimize stray and reflected light across the visible and infrared wavebands for exo-atmospheric optical sensors and seeker telescopes. To achieve this goal Faraday Technology and Pacific Northwest National Laboratory will develop electrochemically textured pyramidal surfaces with CNT black coatings as ...
STTR Phase I 2019 Department of DefenseMissile Defense Agency -
Storable Clean Ethane/ethylene Nitrous Engine (SCENE)
SBC: PIONEER ASTRONAUTICS Topic: MDA18T005he Storable Clean Ethane-ethylene Nitrous Engine (SCENE) is a proposed technology designed to provide upper stages and spacecraft with non-toxic, liquid, non-cryogenic, high-performance propulsion with an Isp on the order of 300 seconds. The propellant components are stored as liquids under their saturated vapor pressures. With the SCENE, nitrous oxide is used as an autogenously pressurized oxidiz ...
STTR Phase I 2019 Department of DefenseMissile Defense Agency -
Non-Intrusive Uncertainty Identification and Quantification Framework for Hypersonic Flights
SBC: CFD RESEARCH CORPORATION Topic: MDA18T006Uncertainty Reduction in High Speed Flight Vehicle Modeling | Approved for Public Release 18-MDA-9707 (3 Jul 18)
STTR Phase I 2019 Department of DefenseMissile Defense Agency -
Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration
SBC: NOVAA LTD Topic: A18BT017The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...
STTR Phase I 2019 Department of DefenseArmy -
Rapid Prototyped 3D Printed Filters for CW Agent Protection
SBC: TDA RESEARCH, INC. Topic: A18BT018Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...
STTR Phase I 2019 Department of DefenseArmy -
Novel Nanocoating technology for Functional Textile
SBC: Claros Technologies Inc. Topic: A18BT024Nanoparticles represent an attractive alternative in coating processes due to their functional versatility, including surface, optical, conductive and catalytic properties. However, current processes of coating textile products with nanoparticles results in rapid loss of the nanoparticles during laundering or use, leading to a significant decrease in product durability and functionality and increa ...
STTR Phase I 2019 Department of DefenseArmy -
W-Band RF Instrumentation
SBC: SRICO INC Topic: A18BT002W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...
STTR Phase I 2019 Department of DefenseArmy -
Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)
SBC: UES INC Topic: A18BT003Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...
STTR Phase I 2019 Department of DefenseArmy -
Design of Easy-To-Use Structural Alloy Feedstocks for Additive Manufacturing
SBC: ELEMENTUM 3D, INC. Topic: A18BT003There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...
STTR Phase I 2019 Department of DefenseArmy