You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Improving Analysis of Large Multidimensional Data through Parallel Processing & Explorative Visualization

    SBC: Frontier Technology Inc.            Topic: MDA18T001

    Using a combination of parallel processing and explorative visualization, a new and exciting solution for high-performance visual analysis of large multidimensional data is proposed. Steady volume flows are selected to demonstrate the strategy, methodology, techniques, and functionalities. Virtual Reality (VR) and Augmented Reality (AR) platforms will be adopted to unleash the power of explorative ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  2. Carbon nanotube coatings on electrochemical textured surfaces for advanced adsorptive baffles

    SBC: Faraday Technology, Inc.            Topic: MDA18T003

    This proposed STTR program addresses the challenge of developing advanced absorptive baffles to minimize stray and reflected light across the visible and infrared wavebands for exo-atmospheric optical sensors and seeker telescopes. To achieve this goal Faraday Technology and Pacific Northwest National Laboratory will develop electrochemically textured pyramidal surfaces with CNT black coatings as ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  3. Storable Clean Ethane/ethylene Nitrous Engine (SCENE)

    SBC: PIONEER ASTRONAUTICS            Topic: MDA18T005

    he Storable Clean Ethane-ethylene Nitrous Engine (SCENE) is a proposed technology designed to provide upper stages and spacecraft with non-toxic, liquid, non-cryogenic, high-performance propulsion with an Isp on the order of 300 seconds. The propellant components are stored as liquids under their saturated vapor pressures. With the SCENE, nitrous oxide is used as an autogenously pressurized oxidiz ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  4. Non-Intrusive Uncertainty Identification and Quantification Framework for Hypersonic Flights

    SBC: CFD Research Corporation            Topic: MDA18T006

    Uncertainty Reduction in High Speed Flight Vehicle Modeling | Approved for Public Release 18-MDA-9707 (3 Jul 18)

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  5. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Test Article Printing with Laser Additive Manufacturing (TAP-LAM) for Threat Surrogate Target Production

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: MDA17T001

    Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  8. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  9. Innovative Methodologies for Manufacturing of Lethality Test Articles

    SBC: Matsys Incorporated            Topic: MDA17T001

    The experimental validation of the DoDs weapon systems is at the cornerstone of national security considerations. The structural requirements for the targets utilized impose a severe cost and lead time burden due to the limitations imposed by the traditional manufacturing processes currently used. Novel manufacturing methods for metal alloys have been established in the past years, but they have y ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  10. Lightweight Magnesium Components of a Missile Body

    SBC: Terves Inc.            Topic: MDA17T004

    Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government