You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Parallel Two-Electron Reduced Density Matrix Based Electronic Structure Software for Highly Correlated Molecules and Materials

    SBC: Q-CHEM, INC.            Topic: A14AT013

    The variational two-electron reduced-density matrix (v2RDM) method provides an effective framework for computer modeling of the electronic structure of complex molecules and materials that exhibit strong correlation effects. In Phase I and Phase II of this STTR we have demonstrated that the GPU-accelerated implementation of the v2RDM-based complete active space self-consistent field (v2RDM-CASSCF) ...

    STTR Phase II 2019 Department of DefenseArmy
  2. Pulse Voltammetry Tools for Accurate and Rapid Analysis of Batteries

    SBC: CFD Research Corporation            Topic: A152092

    Pulse voltammetry techniques, coupled with model-based analysis tools, provide a number of advantages for quantitative analysis of electrochemically active materials that govern the performance of batteries and fuel cells. In prior Phase I and II research, CFD Research developed and validated computational models in software that reads voltammogram data from laboratory instruments; predicts the re ...

    STTR Phase II 2019 Department of DefenseArmy
  3. Provably Unclonable Functions on Re-configurable Devices

    SBC: Potomac Research LLC            Topic: A18BT001

    Physically UnclonableFunctions (PUFs) have been proposed as central building blocks in cryptographic protocols and security architectures. PUFs are physical devices that exhibit a challenge/responsebehavior: when presented with a challenge, the device produces a response that is a random function of both the challenge and the physical properties of the device.In contrast to most digital designs, i ...

    STTR Phase I 2018 Department of DefenseArmy
  4. Provably Unclonable Functions on Re-configurable Devices

    SBC: IERUS TECHNOLOGIES, INC            Topic: A18BT001

    The ability to authenticate electronic devices is an important step towards modernizing the hardware/software of our Nations communication systems. Protecting these targeted networks and devices from malicious cyber-based attacks is becoming increasingly important as the technological and cyber capabilities of our adversaries continue to advance. In addition to network security, device authenticat ...

    STTR Phase I 2018 Department of DefenseArmy
  5. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: Novaa Ltd            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA Research, Inc.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Printable Radar Absorbent Materials/Structures for Soldier Uniforms & Other Army Textiles

    SBC: Luna Innovations Incorporated            Topic: A18BT023

    Portable Advanced Battlefield and Ground surveillance radar can now provide effective detection of small targets, posing challenges for troop movement and stealth missions. Radar absorbent strategies have been achieved in composites and larger textile objects, but effective light-weight solutions for current operational clothing and individual equipment systems such as uniforms, knapsacks and body ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Novel Nanocoating technology for Functional Textile

    SBC: Claros Technologies Inc.            Topic: A18BT024

    Nanoparticles represent an attractive alternative in coating processes due to their functional versatility, including surface, optical, conductive and catalytic properties. However, current processes of coating textile products with nanoparticles results in rapid loss of the nanoparticles during laundering or use, leading to a significant decrease in product durability and functionality and increa ...

    STTR Phase I 2019 Department of DefenseArmy
  9. W-Band RF Instrumentation

    SBC: Srico Inc            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)

    SBC: UES, Inc.            Topic: A18BT003

    Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government