You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Flying Missile Rail and High-Rate Production

    SBC: Cornerstone Research Group, Incorporated            Topic: SB173005

    CRG proposes to leverage its partnerships, advanced aerospace system design capabilities, and unique manufacturing technologies to design, build and demonstrate a flying missile rail along with the high-rate production technologies required to meet DARPA’s objectives of 500 units per month, within one month. CRG will focus on high-rate manufacturing technologies currently in use within the autom ...

    SBIR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  2. Wearable Ultrasound for Imaging and Modulation

    SBC: Maryland Development Center, LLC            Topic: SB173001

    Obstructive sleep apnea (OSA) is a shockingly common clinical sleep disorder that has systemic and devastating health consequences. OSA affects nearly 30 million Americans, and is also highly prevalent in active duty military personnel with nearly 225,000 cases diagnosed between 2004 and 2016. Current treatment methods for OSA are cumbersome and often discarded by patients. Untreated OSA has been ...

    SBIR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  3. Wavelength-Agile Real Time Tabletop X-ray Nanoscope based on High Harmonic Beams

    SBC: Kapteyn-Murnane Laboratories, Inc.            Topic: ST15C001

    Nanoscale, material sensitive, imaging techniques are critical for progress in many disciplines as we learn to master science and technology at the smallest dimensions — on the nanometer to atomic-scale. However, progress in both science and technology is becoming increasingly limited by the constraints of current imaging techniques and metrologies. Fortunately, by combining coherent extreme UV ...

    STTR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  4. Portable Microwave Cold Atomic Clock

    SBC: Spectra Dynamics Inc            Topic: SB141004

    We present the design of a small, portable, microwave cold atomic clock that meets the frequency stability requirement of < 8X10-13 at 1 s averaging time and < 3X10-15 for an averaging time of 1 day. The entire clock is about the size of a desktop computer 18.75 ” X 14.75 ” X 8.77 ” (47.6 cm X 37.5 cm X 22.3 cm) and weighs 30.5 kg. The clock can run on both 100-240 VAC as well as +24 VDC. St ...

    SBIR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  5. Architected C/C Cooling Structures

    SBC: Cornerstone Research Group, Incorporated            Topic: SB152008

    CRG is demonstrating actively cooled, architected C/C designs for shape stable hypersonic structures using MG Resins, a unique, high char yield material system as a replacement to typical phenolic and pitch C/C precursors. The intent is to understand the parametric design space for which C/C structures produced with MG resin facilitate active cooling of various hypersonic structural elements and f ...

    SBIR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  6. Reverse Engineering and Source Development for F107 Replacement Components

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA181007

    The Defense Logistics Agency (DLA) is seeking small businesses capable of manufacturing and supplying an assortment of replacement components for the F107 turbofan engine. The F107 is most commonly used as the propulsion system for cruise missiles. Given the F107’s primary use, maintaining a supply chain capable of keeping the engine in operation is paramount. DLA has stated that the F107 engine ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  7. Advanced Manufacturing Technologies

    SBC: Onto Technology, LLC            Topic: DLA152001

    This Phase II Small Business Innovation Research project develops the scale of lithium-ion direct recycling technologies applied to gain efficiencies in materials management from original manufacturing to end-of-life. The scrap materials are from Defense Logistics Agency manufacturing activities. A successful effort moves direct recycle TRL from 4 to 6, increases process throughput, qualifies mate ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  8. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This SBIR will demonstrate coaxial thermal imaging using the Stratonics ThermaViz® sensor as a uniquely effective tool for tracking process metrics, at high-speed, during laser powder bed fusion (LPBF). The Phase II project will then develop this sensing technique for LPBF process qualification and closed-loop control. The key is integrating ThermaViz into UTC’s AMSENSE® in situ monitoring arc ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  9. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) proposes an Aulë Filament Inspection System (AFIS) to provide filament quality control capability for additive manufacturing (AM). AFIS enables the Defense Logistics Agency (DLA) to confidently support AM efforts both internal to DLA and throughout its customer base such as the Marine Corp Advanced Manufacturing Operations Cell. To create the product quality line system, ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government