You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Further Experimental Validation of a Fluid-Structure-Material Interaction (FSMI) Modeling and Simulation Toolset
SBC: ATA ENGINEERING, INC. Topic: AF17AT025ATA Engineering, Inc. (ATA), partnered with a nonprofit research institution, CUBRC, Inc., (CUBRC), proposes a Phase II STTR project to further develop and continue validating a novel multiphysics simulation technology. The project team will implement the technology in a fluid-structure-material interaction (FSMI) software toolset that incorporates mutual interactions between aerodynamics and stru ...
STTR Phase II 2020 Department of DefenseAir Force -
Integrated Photonic Filters for RF Signal Processing
SBC: OEWAVES, INC Topic: T8In this Project, OEwaves Inc. and Georgia Tech propose to research and develop an RF photonic receiver front-end enabling microwave signal processing at a heterogeneously integrated photonic platform. In particular, we propose to develop a new technology for photonic microwave filters based on the new advances in silicon (Si)-based integrated photonics. In this endeavor, we will exploit the expert ...
STTR Phase II 2020 National Aeronautics and Space Administration -
Chip-Scale THz Generator
SBC: NEXUS PHOTONICS INC Topic: T8We propose to revolutionize the field of frequency-domain THznbsp;spectrometers by developing ~5nbsp;cm3 wide-band spectrometer with improved frequency accuracy, resolution and stability. Integration will also provide significant SWaP-C advantage compared to present solutions allowing deployment in small spacecraft platforms and other applications where low SWaP is crucial.Compared to presently av ...
STTR Phase II 2020 National Aeronautics and Space Administration -
Efficient CO2 and H2O Removal with Novel Adsorbentsfor Life Support Applications on Mars
SBC: MOSAIC MATERIALS, INC. Topic: T6Phase II work will build upon results of Phase I investigations into the performance of cooperative adsorbents for life-support on Mars. The work will focus on the creating of a prototype EMU unit sized to support a single person (1 kg/day of CO2 removal. Tasks in support of this effort include in depth investigations of the role of water on CO2 adsorption mechanism. Improved pellet formulations w ...
STTR Phase II 2020 National Aeronautics and Space Administration -
Novel Aeroservoelastic Scaled Model Design, Fabrication, and Testing
SBC: M4 ENGINEERING, INC. Topic: T15In Phase I we demonstrated the feasibility of a novel aeroservoelastic design approach for scaled model design, and demonstrated fabrication of the resulting designs as a ground test article.nbsp; The test article from Phase I successfully replicated the scaled structural dynamic behavior, and demonstrated the integration of an instrumentation backbone based on PCB technology which allows integrat ...
STTR Phase II 2020 National Aeronautics and Space Administration -
Properties Investigation of High-MON Oxidizers and MMH Blends for Use in Deep Space Exploration
SBC: Frontier Aerospace Corporation Topic: T9The REFPROP program developed by the National Institute of Standards and Technology (NIST) is a widely-used database for industrial fluid properties, including propellants used for chemical rocket propulsion.nbsp; For deep space applications, low-temperature propellants are of particular interest but accurate fluid property data was scarce or unavailable to the industry.nbsp; Recently, NASA MSFC h ...
STTR Phase II 2020 National Aeronautics and Space Administration -
A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction
SBC: CFD RESEARCH CORPORATION Topic: T9Plume-regolith interaction during propulsive landing results in (1) the liberation of dust/debris particles that may collide and strike the landing vehicle and surrounding assets obscuring ground observation for safe landing and (2) craters that are formed on the landing surface, posing additional challenges to vehicle stability and surface operations. The Gas-Granular Flow Solver (GGFS) had previ ...
STTR Phase II 2020 National Aeronautics and Space Administration -
Bifunctional Regenerative Electrochemical Air Transformation for Human Environments
SBC: SKYRE, INC Topic: T6The Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. nbsp;BREATHE is a low-power electrodialysis-based concept for regenerating a liquid carbon dioxide scrubbing mat ...
STTR Phase II 2020 National Aeronautics and Space Administration -
STTR Phase I: Ambulatory, Beat-to-Beat Blood Pressure Tracking Enabled by Wireless, Tri-Mode Electronic Tattoos
SBC: Stretch Med, INC. Topic: MDThe broader impact of this Small Business Technology Transfer (STTR) Phase I project is to address hypertension, which affects about 75 million Americans and is the primary or contributing cause of nearly 500,000 deaths every year in the U.S. A high-fidelity and high wearability blood pressure (BP) tracker will help the diagnosis and control of hypertension. The proposed project Advance the design ...
STTR Phase I 2020 National Science Foundation -
STTR Phase I: Asphalt Rehabilitation Utilizing a 3D Shaped Asphalt Overlay
SBC: ADVANCED PAVING TECHNOLOGIES, INC. Topic: EPThe broader impact/commercial potential of this Small Business Innovation Research (SBIR) project are to use lidar and advanced computer modeling with a 3D asphalt paving machine for asphalt rehabilitation by enabling milling only over areas where the material has broken down, then applying a 3D asphalt overlay tailored to compensate for surface deformations. This will reduce the overall footprint ...
STTR Phase I 2020 National Science Foundation