You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Methodology Development of Atomistically-Informed Chemical Kinetics Model for Rubber Composite Materials

    SBC: Advanced Cooling Technologies, Inc.            Topic: N10AT005

    This Small Business Technology Transfer (STTR) Phase 1 project will develop a novel methodology to build atomistically-informed chemical kinetics models for oxidation and pyrolysis in particulate filled-rubber composite materials. In Navy operations, these materials are widely used in extreme temperature conditions and oxidizing environments. Accurate prediction of the material properties under th ...

    STTR Phase I 2010 Department of DefenseNavy
  2. Wave Detection, Prediction, and Reaction System (WDPRS)

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N10AT036

    In this project Daniel H. Wagner Associates (DHWA), with NASA’s Jet Propulsion Laboratory (JPL) and MARK Resources, Inc. (MRI) as our subcontractors, will develop a lightweight, low-cost Wave Detection, Prediction, and Reaction System (WDPRS) that is designed to reduce the hazard of foundering and/or the violent shocks, pitches, and rolls resulting from improper handling of a small craft in elev ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Translation of Mission Directives to Behaviors Including Thresholds in Autonomous Undersea Search Sensor Elements of Distributed Sensing Systems

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N10AT038

    Autonomous unmanned distributed sensing systems are in the process of revolutionizing undersea military search. The importance of search to military operations is greatest in the environment where detection is the most difficult, i.e. undersea operations. Now distributed sensing systems promise an order of magnitude reduction in search times for enemy undersea targets. In order to realize the pote ...

    STTR Phase I 2010 Department of DefenseNavy
  4. Miniature Electronic DFI for 5-20 Hp HFE

    SBC: JM HARWOOD, LLC            Topic: N10AT033

    JM Harwood, LLC, and UAH Propulsion Research Center propose the development of an electronic miniature Direct Fuel Injection (DFI) system for 5-20 hp heavy fuel engines. This highly integrated Very Small Injection Technology (V-SInTech) DFI system will be capable of (a) multiple injections per cycle, (b) variable injection timing, (c) variable spray penetration depth, (d) real-time closed loop mod ...

    STTR Phase I 2010 Department of DefenseNavy
  5. Analysis and Modeling of Foreign Object Damage (FOD) in Ceramic Matrix Composites (CMCs)

    SBC: N&R ENGNERING MGT SUPPORT SVCS            Topic: N10AT010

    The Phase I deliverable will be a physic-based model which represents a CMC gas turbine component concomitantly at the material level and the structural level. This model will be probabilistically analyzed to account for the uncertainties in material properties and the uncertainties in the size and impact velocities of possible foreign objects (FOD). A ceramic material must display sufficient capa ...

    STTR Phase I 2010 Department of DefenseNavy
  6. Low-Cost Ball/Air/Magnetic Hybrid Bearing System for Extended-Life Micro Gas Turbine Engines

    SBC: Nastec, Inc.            Topic: N10AT037

    A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...

    STTR Phase I 2010 Department of DefenseNavy
  7. Probabilistic Prediction of Location-Specific Microstructure in Turbine Disks

    SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION            Topic: N10AT028

    While there are established methods available in determining the fatigue life of critical rotating components, there is still room for improvement for better understanding and prediction of life limiting factors. Improved risk assessment of jet engine disk components would require probabilistic modeling capability of the evolution of microstructural features, residual stresses and material anomali ...

    STTR Phase I 2010 Department of DefenseNavy
  8. Autonomous Landing at Unprepared Sites for a Cargo Unmanned Air System

    SBC: SKEYES UNLIMITED CORP.            Topic: N10AT039

    Cargo helicopters, such as the Marine Corps CH-47 "Chinook," can lift large payloads and can fly fast to rapidly transport and deploy troops, fly wounded home, or replenish critical supplies. They must do this day and night, in bad weather, and under enemy fire. It is not surprising that of the 750 or so Chinooks delivered to the US Air Force and Army, about 300 (40%) have been lost. Because pilot ...

    STTR Phase I 2010 Department of DefenseNavy
  9. Development of a Computational Method for Prediction of After-Burning Effect

    SBC: BUSA Engineering Consulting            Topic: N10AT002

    This proposal is being submitted in response to the solicitation topic N10A-T002 (Development of a Computational Method for Prediction of After Burning Effect) by BUSA Engineering Consulting (Dr. Jianghui Chao) in collaboration with University of Florida (PI: Prof. S. Balachandar). The overall objective of the proposed effort is to contribute to national defense and security by advancing the state ...

    STTR Phase I 2010 Department of DefenseNavy
  10. Advanced Materials for the Design of Lightweight JP5/JP8/DS2 Fueled Engines for Unmanned Aerial Vehicles (UAVs)

    SBC: Northwest Uld, Inc.            Topic: N10AT001

    Northwest UAV Propulsion Systems proposes using our purpose built heavy fuel engine designed and built in the USA for small unmanned aerial systems in the tier 2 & 3 class. We will be adding a lightweight ceramic material set combined with FEA (Finite Element Analysis) and heavy fuel atomizer (IRAD Project) to create a lightweight engine for a SUAS or STUAS class UAVs. The Ceramic material set is ...

    STTR Phase I 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government