You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Extreme Temperature Distributed Sensing in Modular Energy Systems

    SBC: Luna Innovations Incorporated            Topic: 17b

    Fossil Energy (FE)-based modular power systems are a growing market that can meet the demand of rural and isolated areas both domestically and abroad. Many of these systems, also known as Radically Engineered Modular System (REMS), provide power and/or heat for farms, homes, and other industrial processes. The concept is to produce syngas (synthetic natural gas) from coal and readily available bio ...

    STTR Phase I 2018 Department of Energy
  2. A Mesh Free Framework for Mechanical Simulations of Microstructure Data Files

    SBC: CFD RESEARCH CORP            Topic: 07a

    The Exascale Computing Project is tasked to develop the next generation of high performance computing systems capable of computing at 50 to 100 times faster than current HPC systems. Computing at this extreme-scale will significantly enhance the value of materials modeling and simulation to basic materials research and engineering In particular, computing at the extreme scale will enable a higher ...

    STTR Phase I 2019 Department of Energy
  3. Scalable Framework for Integrating Multi-Omics Data for Biosystem Analysis

    SBC: Omics Data Automation, Inc.            Topic: 01a

    Understanding the genomic basis of economically important plants for growth time, crop yield, responses to drought and disease resistance is of critical importance to sustaining and improving food supplies for humans and livestock, as well as insuring sufficient raw material availability for industries that depend on plant materials, such as biofuel manufacture. Current computational methods for a ...

    STTR Phase I 2019 Department of Energy
  4. A Multi-physics Analysis Capability for Engine Materials

    SBC: Sunergolab Inc.            Topic: 03b

    Computer-aided Engineering software that apply the Finite Element Method to perform a multi-physics analysis have received widespread acceptance for traditional macro-scale material systems. Challenges persist in the modeling of complex coupled processes in environmental/thermal barrier coatings (E/TBCs) used to protect substrate material against the corrosive environment in the hot section parts ...

    STTR Phase I 2019 Department of Energy
  5. Novel Treatment of Produced Waters from Shale Gas with Zero Liquid Discharge by Geothermal Heat

    SBC: SAVENGY TECHNOLOGIES LLC            Topic: 17a

    Vast amounts of impaired waters are produced in gas and oil wells. Energy-efficient desalination systems are needed to treat these waters to produce fresh water and concentrated brines. Mineral recovery systems can also yield valuable critical materials as byproducts. Savengy Technologies and University of Central Florida (UCF) will develop and commercialize an energy efficient system to treat sha ...

    STTR Phase I 2019 Department of Energy
  6. Segmented and Blocky Hydrocarbon Ion Pair Membranes for Fuel Cells

    SBC: NANOSONIC INC            Topic: 10a

    The DOE has identified a need for thin and durable proton conducting membranes that offer enhanced energy efficiency to power zero emission vehicles. Specifically, a cost effective hydrocarbon-based alternative to expensive commercial perfluorosulfonic acid ionomers are sought. Current hydrocarbon membranes do not meet the performance or durability needed in the conditions for transportation fuel ...

    STTR Phase I 2019 Department of Energy
  7. Electrospray Deposition of Perovskite Solar Cells

    SBC: NANOSONIC INC            Topic: 16a

    Perovskite-sensitized solar cells have demonstrated high conversion efficiencies however the stability of device is limited compared to common PV technologies. Moisture, UV irradiation, and high temperature triggered degradation limit their commercial viability; therefore, improved cell durability is necessary for perovskite solar cell market entry. In addition, the scale-up and optimization of th ...

    STTR Phase I 2019 Department of Energy
  8. Plasma-Catalysis of CO2 and CH4 to Produce High Value Chemicals

    SBC: Advanced Cooling Technologies, Inc.            Topic: 20d

    The goal of this work is to develop a new technology that can produce acetic acid in a single-step and do so at reduced temperature and ambient pressure. Current techniques to synthesize acetic acid require methanol and carbon dioxide, both of which are largely made from syngas produced from dry reforming of methane. However, high temperatures are needed to produce the syngas (of which a component ...

    STTR Phase I 2019 Department of Energy
  9. High Temperature (750 to 800 C) Silicon Carbide Receiver Assembly for High Efficiency Gen3 Molten Salt Concentrating Solar Power

    SBC: Ceramic Tubular Products            Topic: 12f

    In 2011, the US Department of Energy (DOE) launched the SunShot Initiative with the goal of making solar electricity cost-competitive with conventional power generation by 2020. Since 2011, research funded by the DOE has resulted in substantial progress toward meeting the aggressive SunShot performance and cost targets, but significant technical hurdles remain. In particular, the Gen3 CSP Roadmap ...

    STTR Phase I 2019 Department of Energy
  10. A Cold Cycle 3He/4He Dilution Refirgerator for milliKelvin cooling with an Intermediate Heat Sink at 1.4 Kelvin

    SBC: ADVANCED RESEARCH SYSTEMS, INC.            Topic: 32c

    As the size of quantum information systems (QIS) increases with technology development, the required cooling power at temperatures below 100mK will increase beyond that which currently available with commercially available milliKelvin cooler technologies. Additionally, as the size of QIS increases the number of electrical signal leads that require heat sinking in the 1K-temperature range will also ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government