You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Meshfree-Based Fracture Evaluation and Design Tool for Welded Aluminum Ship Structures

    SBC: Advanced Dynamics, Inc.            Topic: N10AT041

    The aluminum alloys have low density, relatively high strength, and high strength-to-weight ratio, which brings some major advantages in marine structure design, fabrication, and operations. However, marine ships are subjected to a complex and severe loading, and the typical failure mode of aluminum under extreme dynamics loading such as wave slamming and high velocity impact is ductile fracture. ...

    STTR Phase I 2010 Department of DefenseNavy
  2. Deterministic and Statistical Characterization of the Impact of Control Surface Freeplay on Flutter and Limit-Cycle Oscillation (LCO) using Efficient

    SBC: Advanced Dynamics, Inc.            Topic: N10AT003

    Research is proposed for the development and implementation of state of the art computational and experimental tools for the investigation of the impact of control surface freeplay on the flutter and limit cycle oscillation characteristics of two-dimensional and three-dimensional wings in subsonic and transonic flow. Highly efficient and accurate aeroelastic simulation tools will be constructed ba ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Multiscale Modeling and Analysis of Foreign Object Damage in Ceramic Matrix Composites with the Material Point Method

    SBC: Advanced Dynamics, Inc.            Topic: N10AT010

    This Small Business Technology Transfer Phase I project is aiming at developing and implementing a multiscale composite model to predict the ceramic matrix composite (CMC) response to the impact loading by foreign objects. In particular, the physics-based model will be applied to describe the multiscale foreign object damage (FOD) phenomena of CMCs due to the complex nature of impact dynamics coup ...

    STTR Phase I 2010 Department of DefenseNavy
  4. STOCHASTIC MUTISCALE/MULTISTAGE MODELING OF ENGINE DISKS

    SBC: Advanced Dynamics, Inc.            Topic: N10AT028

    Turbine disks are amongst the most critical components in aero- and naval-vessel engines. They operate in a high pressure and temperature environment requiring demanding properties. Nickel-based supperalloys which have high creep and oxidation resistance at high temperatures are widely used as the material of turbine disks. The elevated-temperature strength of this supperalloy and its resistance t ...

    STTR Phase I 2010 Department of DefenseNavy
  5. Developing a Detailed Chemical Kinetic Model for C-SiC-SiO2-Rubber Composite Materials Exposed to High Temperature, High Pressure, Oxidizing Environme

    SBC: Aerodyne Research, Inc.            Topic: N10AT005

    The objective of this proposed Small Business Technology Transfer (STTR) effort is to develop an experimentally-validated, highly detailed chemical kinetic reference model of surface chemistry for C-SiC-SiO2 rubber composite materials exposed to high temperature, high pressure, oxidizing environments. This reference model will then be reduced into simplified reduced-order models that could be easi ...

    STTR Phase I 2010 Department of DefenseNavy
  6. Validation and Evaluation of Remote, Interactive Teams of Autonomous Systems (VERITAS)

    SBC: Aptima, Inc.            Topic: OSD09T004

    different modes, while using different combinations of subsystems. This presents a challenge for the personnel validating the system during design and development; the number of combinations of environments, modes, and subsystems is exponential. They cannot all be tested, so an optimal subset of tests must be run. We propose to develop VERITAS: Validation and Evaluation of Remote, Interactive Tea ...

    STTR Phase I 2010 Department of DefenseNavy
  7. Prediction of the Full-Scale Cook-off Response Based on Small-Scale Testing

    SBC: BLAZETECH CORPORATION            Topic: N10AT011

    We propose to develop scaling relationships for reaction violence in the cook-off of energetic materials such as explosives or propellants. This will be accomplished by a coordinated effort consisting of data review and analysis. The anticipated results include key non-dimensional parameters that incorporate the thermo-physical, flow, thermodynamic, and kinetic properties of the material, the heat ...

    STTR Phase I 2010 Department of DefenseNavy
  8. Photo Triggered Carbon Nanotube Field Emission Cathode for Free Electron Lasers

    SBC: Busek Co., Inc.            Topic: N10AT023

    Busek Co. Inc (Busek) and Massachusetts Institute of Technology (MIT) propose to develop the design of a photon actuated, ultrafast carbon nanotube (CNT) field emission cathodes for high-power electron beam accelerator sources. The cathode will be based on massive arrays of Vertically Aligned Carbon Nano-Fibers (VA-CNFs) that are individually controlled by a vertical ungated field effect transisto ...

    STTR Phase I 2010 Department of DefenseNavy
  9. Enhanced Riverine Drifter

    SBC: C-2 INNOVATIONS INC.            Topic: N10AT024

    The proposed Autonmous Reactive Ferrrying Drifter (ARF-D) provides wide measured swath, autonomously maintains a buffer distance from close-shore snags, and by utilizing river flow provides a very low power approach to obtaining cross-river surveying, providing greater coverage with minimal power penalty. By randomizing the cross-river transit paths multiple ARF-D units will naturally overcome the ...

    STTR Phase I 2010 Department of DefenseNavy
  10. FreeSwim: Autonomous Behaviors for Undersea Sensors

    SBC: Charles River Analytics, Inc.            Topic: N10AT038

    Future naval operations are expected to make extensive use of unmanned vehicles to support a range of operations, including intelligence gathering, mine warfare, force protection, and anti-submarine warfare. Current unmanned systems are typically controlled remotely by an operator who directly manipulates a control interface for the vehicle. The effectiveness of this approach is obviously limited ...

    STTR Phase I 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government