You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. A Li-Ion Battery Tool for Predicting Life and Performance for Satellite Orbit Operations Scenarios

    SBC: Global Aerospace Corporation            Topic: MDA08T008

    The expected life of satellite Li-Ion batteries is determined by many factors, including thermal considerations, electrode chemistries, orbit and mission life, DOD, and pulse power requirements. First-principles battery model literature pertains primarily to orbital cycling at moderate DOD under isothermal conditions without variable power loads. Knowledge must be extended to encompass wider life ...

    STTR Phase II 2010 Department of DefenseMissile Defense Agency
  4. An improved passivation process for the fabrication of high performance antimony based III-V superlattice materials

    SBC: IRDT Solutions, Inc            Topic: MDA12T003

    Phase I objective is to demonstrate the feasibility of our proposed passivation approach to minimize the dark current noise and improve the quantum efficiency in the GaSb based type II superlattice detectors. Phase I goal is to demonstrate the feasibility of our technology to fabricate photodiodes with cut-off wavelength in excess of 10µm, quantum efficiency exceeding 70% and dark current density ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  5. Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates

    SBC: Sinmat Inc            Topic: MDA09T001

    Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  6. Development for Radiation Hardened Applications of Advanced Electronics Materials, Processes, and Devices

    SBC: RNET TECHNOLOGIES, INC.            Topic: MDA09T006

    The Missile Defense Agency (MDA) seeks technical investigations related to the development and application of advanced electronic materials, processes, and devices to meet its need for radiation hardened, high performance electronics for critical space and missile applications. With the advent of smaller transistor dimensions and reductions in price per bit, significant changes in materials and pr ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  7. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  8. Efficient Clutter Suppression and Nonlinear Filtering Techniques for Tracking Dim Closely Spaced Objects in the Presence of Debris

    SBC: TOYON RESEARCH CORPORATION            Topic: MDA12T004

    EO/IR elements of the Ballistic Missile Defense System (BMDS) responsible for detecting and tracking ballistic missile threats encounter extraordinarily challenging threat and scene phenomenology. Specifically, non-stationary clutter characteristic of airborne and satellite-based sensor systems, along with dim target signatures, closely-spaced objects, and dense debris clouds typical of ballistic ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  9. Fabrication of Ta-Hf-C-based Ultra High Temperature Composites via a

    SBC: UES, Inc.            Topic: MDA09T002

    This Phase I STTR program seeks a new fabrication method to produce stronger (>100 kpsi) and tougher (>10 MPa m1/2) ultra high temperature Ta-Hf-C-based composites (UHTC) with an outstanding oxidation resistance for use as thermal protection systems for hypersonic applications, as well as for advanced rocket nozzle throat components. UES will apply a novel "Top Down" approach to control the micro ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  10. Handoff Training for Combat Casualty Care (HTC3) Framework

    SBC: PERCEPTRONICS SOLUTIONS, INC.            Topic: DHA17B001

    This proposal is to develop a Handoff Training for Combat Casualty Care (HTC3) Framework.Training is the crux of the handoff problem today. Patient handoffs are a crucial part of casualty care, both in military and civilian environments; and today handoffs are being performed in less than optimal fashion, with ineffective communications accounting for 80% of the handoff errors. Our new HTC3 Framew ...

    STTR Phase I 2018 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government