Award Data

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

PPT, in collaboration with the Jet Propulsion Laboratory, proposes to develop a manufacturable packaging technology for monolithic Wavelength Division Multiplexing (WDM) laser arrays for all-optical fiber communications. The packaging technology will include coupling from a monolithic laser array to individual fibers and a microwave feed for each of the individual elements, all in a hermetically s ...

Phase I objective is to demonstrate the feasibility of our proposed passivation approach to minimize the dark current noise and improve the quantum efficiency in the GaSb based type II superlattice detectors. Phase I goal is to demonstrate the feasibility of our technology to fabricate photodiodes with cut-off wavelength in excess of 10µm, quantum efficiency exceeding 70% and dark current density ...

A novel fiber Bragg grating stabilized laser array is proposed here. The multi-wavelength source is aimed at low cost dense wavelength division multiplexing (DWDM) applications where the superior properties, i.e., low chirp, low temperature dependence, of the fiber Grating is utilized. The resultant product is a coolerless multi-wavelength laser source that can be modulated with direct current. T ...

Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

The Missile Defense Agency (MDA) seeks technical investigations related to the development and application of advanced electronic materials, processes, and devices to meet its need for radiation hardened, high performance electronics for critical space and missile applications. With the advent of smaller transistor dimensions and reductions in price per bit, significant changes in materials and pr ...

EO/IR elements of the Ballistic Missile Defense System (BMDS) responsible for detecting and tracking ballistic missile threats encounter extraordinarily challenging threat and scene phenomenology. Specifically, non-stationary clutter characteristic of airborne and satellite-based sensor systems, along with dim target signatures, closely-spaced objects, and dense debris clouds typical of ballistic ...

This Phase I STTR program seeks a new fabrication method to produce stronger (>100 kpsi) and tougher (>10 MPa m1/2) ultra high temperature Ta-Hf-C-based composites (UHTC) with an outstanding oxidation resistance for use as thermal protection systems for hypersonic applications, as well as for advanced rocket nozzle throat components. UES will apply a novel "Top Down" approach to control the micro ...

This proposal is to develop a Handoff Training for Combat Casualty Care (HTC3) Framework.Training is the crux of the handoff problem today. Patient handoffs are a crucial part of casualty care, both in military and civilian environments; and today handoffs are being performed in less than optimal fashion, with ineffective communications accounting for 80% of the handoff errors. Our new HTC3 Framew ...