You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Advanced Morphing Moulage for Medical Training (AMM-MT)

    SBC: VCOM3D INC            Topic: DHA17A002

    For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  4. Aerospace Vehicle Signature Modeling Technologies

    SBC: GOHYPERSONIC INCORPORATED            Topic: MDA15T003

    The proposed work will incorporate the newly released software into the signature analysis workflow. Extensions of the US3D flow solver will include improvements to the decoupled implicit solver to robustly and efficiently handle reacting flow. Trajectory specification, conjugate vehicle heating, and ablation with surface recession will be enabled through use of a Trajectory Ablation & Shape Chang ...

    STTR Phase I 2017 Department of DefenseMissile Defense Agency
  5. A Li-Ion Battery Tool for Predicting Life and Performance for Satellite Orbit Operations Scenarios

    SBC: GLOBAL AEROSPACE CORPORATION            Topic: MDA08T008

    The expected life of satellite Li-Ion batteries is determined by many factors, including thermal considerations, electrode chemistries, orbit and mission life, DOD, and pulse power requirements. First-principles battery model literature pertains primarily to orbital cycling at moderate DOD under isothermal conditions without variable power loads. Knowledge must be extended to encompass wider life ...

    STTR Phase II 2010 Department of DefenseMissile Defense Agency
  6. An Efficient 35 K Cryocooler Driven by Electrochemical Compressors

    SBC: CREARE LLC            Topic: MDA09T007

    Next-generation missile defense systems will utilize infrared sensing technologies that will require efficient cooling at low temperatures. We propose to develop an innovative solid-state cryocooler that can provide cooling at temperatures below 35 K while rejecting heat at temperatures up to about 300 K. The cooler uses compact, efficient electrochemical compressors with no moving parts to enha ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  7. An improved passivation process for the fabrication of high performance antimony based III-V superlattice materials

    SBC: IRDT Solutions, Inc            Topic: MDA12T003

    Phase I objective is to demonstrate the feasibility of our proposed passivation approach to minimize the dark current noise and improve the quantum efficiency in the GaSb based type II superlattice detectors. Phase I goal is to demonstrate the feasibility of our technology to fabricate photodiodes with cut-off wavelength in excess of 10µm, quantum efficiency exceeding 70% and dark current density ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  8. Biofidelic Rat Surrogate for Blast-Induced Neurotrauma Studies

    SBC: CREARE LLC            Topic: A17AT022

    Blast-induced Traumatic Brain Injury (TBI) is a major threat to the health of military personnel serving in modern theaters. As such, the biomechanical injury pathways of TBI are and have been the focus of many animal studies. However, differences in the experimental setups across laboratories make it difficult to draw definitive conclusions from the resulting data. A tool that can accurately e ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  9. Biomechanical Rat Testing Device to Validate Primary Blast Loading Conditions for Mild Traumatic Brain Injury

    SBC: CREARE LLC            Topic: A17AT022

    Blast induced Traumatic Brain Injury (TBI) is a major threat to the health of military personnel serving in modern theaters. As such, the biomechanical injury pathways of TBI are, and have been, the focus of many animal studies. However, differences in the experimental setups across laboratories make it difficult to draw definitive conclusions from the resulting data. A tool that can accurately es ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  10. Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates

    SBC: Sinmat Inc            Topic: MDA09T001

    Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government