You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Activated Reactants to Reduce Fuel Cell Overpotentials

    SBC: JSJ Technologies, LLC            Topic: A10AT011

    The current produced in electrochemical galvanic cells is primarily dependent on the rate of the electrode reactions where the cell's anode is less negative, supplying less energy than thermodynamically predicted, and the cell's cathode is less positive, supplying less energy than thermodynamically predicted. Reduction of electrochemical overpotentials in electrochemical systems has been the prim ...

    STTR Phase I 2010 Department of DefenseArmy
  2. Adaptive Distributed Allocation of Probabilistic Tasks (ADAPT)

    SBC: APTIMA INC            Topic: A18BT007

    Logistic operations for all branches of the military have historically been a guessing game relying on the intuition and past experience of the responsible officials. Unfortunately, this strategy often means that resources are deployed prematurely to areas that do not have an immediate need, thereby denying those assets to other areas that could have used them immediately. Worse, resources can als ...

    STTR Phase I 2019 Department of DefenseArmy
  3. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
  4. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
  5. A Long-Term Anti-Malaria Drug-Releasing Implant

    SBC: Triton Systems, Inc.            Topic: A18BT022

    The U.S. Army routinely deploys personnel in malaria-endemic regions as part of normal operations. Preventative measures to malaria infection include a highly-effective daily oral prophylactic antibiotic which is provided to personnel prior to deployment. However, due to side effects including nausea and photosensitivity coupled with organizational culture, poor adherence to the prescribed regimen ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Analysis and Design of Adaptive Multi-Function Antenna Systems Based on Signal Fragmentation

    SBC: Albanese Defense and Energy Development Company            Topic: A18BT009

    We propose an innovative mathematical approach to the analysis and design of multi-function adaptive antenna systems. It uses the idea of signal fragmentation that has passed significant prior testing and employs the methods and results from sampling theory, approximation theory, and numerical optimization. The fragmentation of a signal into a combination of short elementary pulses (wavelets) allo ...

    STTR Phase I 2019 Department of DefenseArmy
  7. A Near Autonomous Combat Casualty Extraction Robotic System

    SBC: Hstar Technologies            Topic: A10AT028

    Hstar proposes a near autonomous combat casualty extraction robot (c2Exbot) system that: 1) supports autonomous dexterous manipulation, safe patient lifting and near autonomous navigation control, 2) utilizes a supervisory telepresence operation mechanism, 3) provides near autonomous patient diagnosis, injury assessment and emergency treatment, and d) provides semi-autonomous patient monitoring an ...

    STTR Phase I 2010 Department of DefenseArmy
  8. Bioelectrocatalyzed Nitrogen Fixation under Standard Conditions

    SBC: Fulcrum Bioscience, LLC            Topic: A13AT007

    The synthesis of ammonia through nitrogen fixation is a vital component to all plant life and the world economy as a fertilizer and commodity chemical. The global industial production of ammonia exceeded 140MM tons in 2009 and is expected to grow to 160MM tons by 2020. Most ammonia,>90% is synthesized through the Haber-Bosch processThe Haber-Bosch process produces more than 90% of the industrial ...

    STTR Phase I 2013 Department of DefenseArmy
  9. Bio-Inspired Visual Navigation: From Landmarks via Bearing to Controls

    SBC: Intelligent Automation, Inc.            Topic: A12aT030

    In a low-texture indoor environment, landmark-based navigation is difficult due to lack of distinctive micro-features such as SIFT and SURF. Intelligent Automation, Inc. (IAI) and GRASP Laboratory at the University of Pennsylvania propose a Bio-Inspired Visual Navigation System with the following three innovations: First, we propose a segmentation-based method to extract landmarks as closed contou ...

    STTR Phase I 2013 Department of DefenseArmy
  10. BRDF Analysis of LADAR-based Target Surface Characterization

    SBC: Spectral Sciences, Inc.            Topic: A10AT006

    LADAR light reflection from a target is highly dependent of the spectral reflectivity and texture properties of the surface. Such dependencies could be exploited for target recognition based on surface characterization with appropriate imaging conditions and processing algorithms. Target surface light reflection is characterized by the Bidirectional Reflectance Distribution Function (BRDF), which ...

    STTR Phase I 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government