You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  2. Additive Manufacturing of Scalable 3D Resonators

    SBC: Global Research and Development Inc.            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
  3. Advanced Membranes for CO2 Capture from Existing Coal-fired Power Plants

    SBC: Nextech Materials, Ltd.            Topic: 24a

    Coal is an abundant source of energy in the USA, but is not currently utilized effectively. Recently, the DOE has begun a carbon sequestration program is to develop advanced CO2 capture and compression technology for existing coal-fired plants with increased efficiency with no more than a 35% increase in the cost of electricity. This will require new approaches and technologies to be successful. N ...

    STTR Phase I 2010 Department of Energy
  4. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: HANDIX SCIENTIFIC Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
  5. Atomically Precise Membranes for the Separation of Hydrocarbons

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: 02a

    Separations often account for a majority of process costs. This is because all traditional separation processes have inherent weaknesses that prevent the system from achieving perfect (or even near perfect in many instances) selectivity. These weaknesses result in large recycle streams and require multiple separation units in concert in order to produce a product clean enough for use or sale. An a ...

    STTR Phase II 2018 Department of Energy
  6. Cavity Enhanced Thomson Scattering System for Low Temperature Plasmas

    SBC: Seaforth LLC            Topic: 30a

    Electrons play a very key role in plasma chemistry and dynamics of low temperature plasmas. Improved capability for measuring electron number density, ne, and electron energy distribution function, EEDF, in weakly ionized low temperature plasmas would benefit both fundamental study and application areas. For example, the capability would directly benefit emerging research targeted at modifying and ...

    STTR Phase I 2013 Department of Energy
  7. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: Advanced Conductor Technologies LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  8. Defect Free, Ultra-Rapid Thinning/Polishing of Diamond Crystal Radiator Targets (20??m) for Highly Linearly Polarized Photon Beams

    SBC: Sinmat Inc            Topic: 46e

    The fabrication of high-quality ultra thin (~20 micron) diamond crystals targets for 9 GeV highly polarized photon beams is an outstanding challenge. Current state of the art polishing/thinning techniques are not successful in thinning single crystal diamond to such dimension because of its extreme hardness and chemical inertness. These techniques create significant stresses surface and sub-surfac ...

    STTR Phase I 2010 Department of Energy
  9. Development of Burst-mode Laser based High-speed Microwave and Thomson Scattering Instruments for Fusion Plasma Devices

    SBC: Spectral Energies, LLC            Topic: 21a

    Fusion plasma devices at various DOE and international facilities need high-speed diagnostic tools to understand, predict, and control fusion plasmas. Thomson scattering (TS) at tens of Hz has routinely measured electron temperature (Te) and electron number density (ne) inside the plasma system. However, at these data rates traditional TS can obtain only a sparse data set, which significantly limi ...

    STTR Phase I 2018 Department of Energy
  10. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government