You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Development for Radiation Hardened Applications of Advanced Electronics Materials, Processes, and Devices
SBC: RNET TECHNOLOGIES INC Topic: MDA09T006The Missile Defense Agency (MDA) seeks technical investigations related to the development and application of advanced electronic materials, processes, and devices to meet its need for radiation hardened, high performance electronics for critical space and missile applications. With the advent of smaller transistor dimensions and reductions in price per bit, significant changes in materials and pr ...
STTR Phase I 2010 Department of DefenseMissile Defense Agency -
Innovative Photonic Time Delay Units for Radar Applications
SBC: S2 CORPORATION Topic: MDA08T012We aim to build and demonstrate an innovative photonic true time delay solution which alleviates the fundamental problem of cascaded optical switches, and additionally offers several significant benefits. The device uses wideband spatial-spectral (S2) holographic optical memory materials to store and access several broadband time delay gratings. Broadband optical chirps are used to create these ti ...
STTR Phase II 2010 Department of DefenseMissile Defense Agency -
Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates
SBC: Sinmat Inc Topic: MDA09T001Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...
STTR Phase I 2010 Department of DefenseMissile Defense Agency -
Fabrication of Ta-Hf-C-based Ultra High Temperature Composites via a
SBC: UES INC Topic: MDA09T002This Phase I STTR program seeks a new fabrication method to produce stronger (>100 kpsi) and tougher (>10 MPa m1/2) ultra high temperature Ta-Hf-C-based composites (UHTC) with an outstanding oxidation resistance for use as thermal protection systems for hypersonic applications, as well as for advanced rocket nozzle throat components. UES will apply a novel "Top Down" approach to control the micro ...
STTR Phase I 2010 Department of DefenseMissile Defense Agency -
Software Defined Multi-Channel Radar Receivers for X-band Radars
SBC: DGNSS Solutions, LLC Topic: MDA09T003The primary objective of the proposed research is to develop proof of concept of a software programmable X-Band radar system using low cost antenna array technology with digital beamforming architecture based on multiple receiver channels. The performance objectives will aim at a minimum of 400 MHz instantaneous bandwidth and a minimum instantaneous dynamic range of 52 dB. The objective of the t ...
STTR Phase I 2010 Department of DefenseMissile Defense Agency -
Innovative Polishing Technology for Fabrication of High Performance Epi-ready GaSb Substrates
SBC: Sinmat Inc Topic: MDA12T003Antimony containing III-V semiconducting compounds are particularly attractive for the fabrication of a wide variety of electronic and optoelectronic devices such as photo detectors operating in the long wave infrared wavelength (12-32µm) range. The production of epi quality GaSb wafers still remains one of the important problems for rapid commercialization of GaSb devices. Sinmat Inc. proposes a ...
STTR Phase I 2013 Department of DefenseMissile Defense Agency -
M&S Uncertainty Quantification
SBC: OPTIMIZATION TECHNOLOGIES, INC. Topic: MDA12T007OptTek Systems, Inc (OptTek), proposes an affordable, effective UQ capability for both legacy and new BMDS M & S. The OptTek Team includes research institution partner Oak Ridge National Laboratory (ORNL) and subcontractor RTSync Corporation (RTSync). The proposed BMDS M & S UQ capability maximizes insertability into existing and future MDA BMDS M & S-supported Event processes, analysis methods, a ...
STTR Phase I 2013 Department of DefenseMissile Defense Agency -
M&S Uncertainty Quantification
SBC: NUMERICA CORPORATION Topic: MDA12T007A goal of Uncertainty Quantification (UQ) is to use computer simulation of complex systems to make scientifically informed assessments for high-consequence decisions. Because end-to-end empirical data is difficult to obtain for the Ballistic Missile Defense System (BMDS), computer simulation provides the best method for understanding BMDS capabilities against a wide range of threats. Numerica Co ...
STTR Phase I 2013 Department of DefenseMissile Defense Agency -
Oxygen Production and Delivery on Demand
SBC: GLOBAL RESEARCH & DEVELOPMENT INC Topic: DHA17B005This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...
STTR Phase I 2018 Department of DefenseDefense Health Agency -
Additive Manufacturing of Metallic Materials for High Strain Rate Applications
SBC: MRL MATERIALS RESOURCES LLC Topic: MDA17T001Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...
STTR Phase I 2018 Department of DefenseMissile Defense Agency