You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Power and Propulsion System Optimization

    SBC: Cornerstone Research Group, Incorporated            Topic: N18AT012

    Unmanned underwater vehicles (UUVs) are currently limited in the type of missions they can perform. Limited available power limits which sensors can be run or for how long, and also limits the duration and range of the mission. More efficient propulsion systems would increase the power available to the UUV payload. Improved power distribution systems and control systems would also increase the ava ...

    STTR Phase I 2018 Department of DefenseNavy
  2. New Integrated Total Design of Unmanned Underwater Vehicles (UUVs) Propulsion System Architecture for Higher Efficiency and Low Noise

    SBC: Continuous Solutions LLC            Topic: N18AT012

    In this proposal, a meta model-based scaling law will be used to represent each system component. A components meta model-based scaling law describes the tradeoffs between performance metrics for that component or subsystem as a function of its ratings in relation to the system. This greatly reduces the number of degrees of freedom for each component, and at the same time, retains the information ...

    STTR Phase I 2018 Department of DefenseNavy
  3. Principled Design of an Augmented Reality Trainer for Medics

    SBC: Unveil LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  4. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  5. Compact Thermal Management System for Laser Systems

    SBC: Spectral Energies, LLC            Topic: N18AT001

    The use of laser technologies and high-power electronics is rapidly being incorporated into tactical platforms for imaging, target designation, and range finding. Electronic equipment including lasers demand power from a tactical aircraft and produce large amounts of thermal energy as a waste product. Current thermal management technologies will not be sufficient for future aircraft as thermal man ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Autonomous Navigation for the Hull Bug Ship Hull Grooming System

    SBC: SeaRobotics Corporation            Topic: N18AT020

    The underpinning science and sensing associated with autonomous navigation is advancing on numerous fronts. The navigation capability required for ship hull grooming in a low visibility environment is a natural application of this technology. Enormous benefit will be realized in the public and private sectors of the shipping industry. The economic and environmental impact realized using proactive ...

    STTR Phase I 2018 Department of DefenseNavy
  7. Control & Optimization of Multiple Illumination Characteristics (COMIC) of A Pulsed Fiber Array Laser System For Active Imaging Through Fog

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: N18AT021

    Degraded weather conditions particularly, dense maritime fog, reduces the US Fleet EO/IR systems ability to maintain situational awareness and detect/identify and track targets of interest. It is the Navys goal to develop an active EO/IR imaging system that jointly optimizes illumination source properties and implements advanced image processing to improve performance and operational range of curr ...

    STTR Phase I 2018 Department of DefenseNavy
  8. Information-based Norms on Flow, Operations, and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

    STTR Phase I 2018 Department of DefenseNavy
  9. High Throughput Static and Dynamic Testing of AM Materials for Uncertainty Quantification and Qualification

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Qualification of additively manufactured parts is hampered by the inherent uncetainty in properties due to heterogeneity in processing, microstructure, and defects. The proposed effort combines high-throughput testing of static and dynamic properties using tailored sample geometry, fixture design, and load application method with microstructure quantification and analysis. This system will drastic ...

    STTR Phase I 2018 Department of DefenseNavy
  10. Laser Additive Manufacturing of Seven Thousand Series Aluminum Aircraft Components (LAM-STAAC)

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: N18AT005

    Alloys of aluminum in the 7000 series are known to have good weight, strength, and fatigue properties and are commonly used in Naval aircraft components. Recent manufacturing trends are increasingly focused on additive manufacturing (AM) methods as a way to reduce lead time, cost, and to improve part performance. Current additive manufacturing techniques are unable to fabricate parts in 7000 serie ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government