You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Reverse Engineering of MILSTAR Battery Pack

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA182003

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for the MILSTAR system battery assembly. Mainstream Engineerings unique integration of engineering, manufacturing, quality control, and integrated logistics support (ILS) provides the government with the best value for the proposed NSN.The MILSTAR nickel-metal hydride battery pack lacks sufficient comme ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Noninvasive Monitor of Vascular Volume Fluid Shifts

    SBC: Innovital Systems, Inc.            Topic: DHP17007

    Accurateintravascularvolumeassessment improves the detection of hemorrhageand hypovolemiaand facilitates decision-makingrelativeto resuscitation,surgery,and selection of higher level ofmedical care. Non-invasiveassessment techniquesare particularly important in thefield. Currentapproachesand devices do not have broad utilityand availability. Duringthe PhaseIeffort, the project team developed alow- ...

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  3. Mobile Virtual Interactive Presence Capability for Combat Casualty Care

    SBC: ARCHIE MD INC.            Topic: DHP15002

    ArchieMD will develop an augmented reality (AR) telemedicine training system for integration into the training and assessment of military medical procedures.The system will enable physician instructors to: 1) project expertise to the point of injury, pr

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  4. SWAC3: Secure Wireless Architecture for Combat Casualty Care

    SBC: INTELLIGENT AUTOMATION, INC.            Topic: A14051

    Current practice for handling pre-hospital documentation is primarily paper based with several major limitations such as ease of loss or destruction, susceptibility to the environment, etc., which along with other factors have been identified as the reasons for the lack of pre-hospital care documentation. Moreover, the information related to care rendered by one unit (e.g., first responders at the ...

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  5. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: UTILITY DEVELOPMENT CORP            Topic: DLA163003

    The objective will becontinue the progress made in Phase I program for anti-counterfeiting label/tape solutions which are easy to deploy through the existing DLA supply chain. We willdemonstratethe technologies withtamper and counterfeit detection capabilities. A comprehensive report will be submitted that will include the results of the demonstration, describes how the technology might be impleme ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  6. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: X-Wave Innovations, Inc.            Topic: DLA18A001

    Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Achieving Transformative Productivity through application of Collaborative Augmented Reality Systems (CARS)

    SBC: Vecna Technologies, Inc.            Topic: DLA181001

    The Defense Logistics Agency (DLA) is seeking to automate parts of their procurement, logistics, and distribution processes by applying Augmented Reality (AR) solutions to increase efficiency and reduce costs. Vecna Robotics' world-leading automation consulting team is well-positioned to leverage a deep and broad understanding of advanced technology and its application to warehouse operations. Vec ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government