You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Oxygen Production and Delivery on Demand

    SBC: GLOBAL RESEARCH & DEVELOPMENT, INC.            Topic: DHA17B005

    This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  2. AeroQUEST: Aeromedical Quantified Understanding via Experimental Standards Toolkit

    SBC: Aptima, Inc.            Topic: DHA17C001

    Adverse physiological events (PEs) have plagued warfighters piloting military aircraft, in particular PEs involving hypoxia and cockpit cabin decompression. Though there has been a large variety of research performed in trying to understand the problems and why theyre caused, there are inefficiencies due to the lack of standardized cross-laboratory protocols, procedures, and metrics. To address th ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  3. Brain Targeting Nanoparticle for Drug Delivery in Traumatic Brain Injury

    SBC: Weinberg Medical Physics, Inc.            Topic: DHA18A001

    There is an urgent need to bypass or cross the blood brain barrier (BBB) to deliver drugs for TBI treatment. This project aims to develop targted intranasally delivered, magnetically propulsed, and targted nanoparticles for traumatic brain injury (TBI). In Phase I, we will demonstrate the design, fabrication, and in vitro characterization of proposed drug laden magnetic nanoparticles as well as co ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  4. Low-Cost Diagnostic Platform for Rapid Biochemical Detection

    SBC: Triton Systems, Inc.            Topic: DHA17B004

    Triton Systems will develop a novel approach to field-based disease and biochemical diagnostics through innovative use of extremely low cost bioanalytical devices.The proposed platform will provide a low cost, portable, and reliable diagnostic test for on-site use in austere and resource-limited environments.The devices will be highly durable, rugged, and easy to use without user-induced variation ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  5. Underwater Blast Injury Monitoring

    SBC: Triton Systems, Inc.            Topic: DHA17C002

    Triton Systems, Inc. proposes to develop a piezo-textile that can capture underwater explosion pressure wave patterns to ultimately establish and monitor for injury risk severity. We propose to use a state-of-the-art piezo-textile to which we will apply our own proprietary treatments.We will assess our textiles pressure detection performance and durability against a non-textile piezoelectric array ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  6. OrFPGA: An Empirical Performance Tuning Tool for FPGA Designs

    SBC: RNET TECHNOLOGIES, INC.            Topic: T1101

    With the capacity and performance of FPGAs suitable for space borne applications continuously increasing, the design of FPGAs is becoming increasingly complex involving trading off or simultaneous optimization of space, speed, and power. RNET and ANL are proposing to develop software infrastructure that facilitates automatic performance tuning of FPGAs in terms of speed, power, and size. We introd ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  7. Integrated Motion Planning and Autonomous Control Technology for Autonomous ISR

    SBC: Scientific Systems Company Inc.            Topic: T1502

    SSCI and MIT propose to design, implement and test a comprehensive Integrated Mission Planning \ & Autonomous Control Technology (IMPACT) for Autonomous ISR missions employing collaborating Unmanned Aerial Vehicles (UAV). The main feature of the IMPACT system for Autonomous ISR is that it is based on robust real-time learning about dynamic and stochastic environments, and on a capability to autono ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  8. Novel Near-to-Mid IR Imaging Sensors Without Cooling

    SBC: BOSTON APPLIED TECHNOLOGIES, INCORPORATED            Topic: T802

    Boston Applied Technologies, Inc (BATi), together with Kent State University (KSU), proposes to develop a high sensitivity infrared (IR) imaging sensor without cooling, which covers a broad band from near infrared (NIR) to mid-infrared (mid-IR). It is based on a specific transparent functional material developed at BATi that has excellent pyroelectric effect, over strong absorption at NIR, mid-IR ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  9. Aeroservoelastic Multifidelity Design of Biomimetic Aircraft (AMuBA)

    SBC: Intelligent Automation, Inc.            Topic: T15

    NASA has been investigating morphing aircraft for multi-mission capabilities and performance improvements in existing fixed-wing aircraft. In addition, the design of aeroelastic aircraft that can control the structural flexibility to their advantage, is an open area of research and development. In spite of the plethora of work on morphing aircraft and long slender wings, the goal of fielding such ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Extensible Modeling to Create Knowledgebase for AM Processing of Alloy GrCop-84

    SBC: Applied Optimization, Inc            Topic: T12

    The research objective of the proposed work is to demonstrate feasibility of utilizing extensible modeling to create an AM knowledgebase for copper alloy, GrCop-84, and utilize it to design an AM process for GrCop-84. The work plan has three tasks: (1) Utilize process modeling to demonstrate feasibility of predicting AM process parameters for alloy GrCop-84 for the powder bed and blown powder proc ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government