You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Body Conformal, Compression Garment Based Platform for Warfighter Readiness Assessment and Monitoring

    SBC: HUMAN SYSTEMS INTEGRATION INC            Topic: DHA17005

    Rugged, comfortable and reliable physiological monitoring systems are required to allow military commanders and medical personnel to assess the basic health and readiness of the warfighter. Direct monitoring of the health and status of individual warfight

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  2. Additive Manufacturing of Biomimetic Self-Healing Composite Tissues

    SBC: ADVANCED LIFE TECHNOLOGIES, LLC            Topic: DHA17002

    The main objective of this Phase II SBIR project is to evaluate a number of different self-healing tissue compositions suitable for incorporation into surgical training models.Successful implementation of Phase I formulations will be extended to a wider

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  3. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery Corp.            Topic: DLA142001

    In Phase I, XABC scaled the capability to produce nanostructured LCO cathodes using an electroplating process.In this phase II proposal, XABC proposes to further demonstrate this unique manufacturing capability to produce full cell batteries with enhanced performance and reduced cost in DLA products, as a precursor to XABC becoming a domestic manufacturer of electrochemical cells.This Phase II pro ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  7. AeroQUEST: Aeromedical Quantified Understanding via Experimental Standards Toolkit

    SBC: APTIMA INC            Topic: DHA17C001

    Adverse physiological events (PEs) have plagued warfighters piloting military aircraft, in particular PEs involving hypoxia and cockpit cabin decompression. Though there has been a large variety of research performed in trying to understand the problems and why theyre caused, there are inefficiencies due to the lack of standardized cross-laboratory protocols, procedures, and metrics. To address th ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  8. An Auditory Evoked Response-Based Objective Tinnitus (AER-BOT) Diagnostic Device: Phase II

    SBC: QUANTUM APPLIED SCIENCE & RESEARCH INC            Topic: OSD11H11

    In 2010 tinnitus became the most common service-related disability among veterans, with disability benefit costs projected to exceed $2.26 billion by 2014. Methods for objective diagnosis of tinnitus are currently nonexistent and direly needed by the military. QUASAR and Otosound are partnering on this SBIR project to develop an efficient and objective tinnitus diagnostic device. This device ...

    SBIR Phase II 2013 Department of DefenseDefense Health Agency
  9. A New High Sensitivity High Resolution Sensor for X-Ray CT

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: OSD11H15

    To address issues of sub-optimal performance of current X-ray CT scanners used by the first re-sponding providers to expedite diagnosis and triage, we are developing a novel scintillator that offers a unique promise to achieve high-sensitivity, high-resolution X-ray imaging through its integration into exist-ing CT detectors. The material we propose is recently discovered, and offers exceptionall ...

    SBIR Phase II 2013 Department of DefenseDefense Health Agency
  10. Anterior Eye OCT-based Profiler for Automating Ocular Surface Prosthetic Fitting

    SBC: PHYSICAL SCIENCES INC.            Topic: OSD11H09

    The use of a Prosthetic Replacement of the Ocular Surface Environment (PROSE) device is a revolutionary treatment for military patients that have lost their eyelids due to 3rd degree facial burns as well as for civilians who suffer from a host of corneal diseases. However, custom manual fitting is often a protracted painful, inexact process that requires multiple fitting sessions. Training for ne ...

    SBIR Phase II 2013 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government