You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Provably Unclonable Functions on Re-configurable Devices

    SBC: Potomac Research LLC            Topic: A18BT001

    Physically UnclonableFunctions (PUFs) have been proposed as central building blocks in cryptographic protocols and security architectures. PUFs are physical devices that exhibit a challenge/responsebehavior: when presented with a challenge, the device produces a response that is a random function of both the challenge and the physical properties of the device.In contrast to most digital designs, i ...

    STTR Phase I 2018 Department of DefenseArmy
  2. Anisotropic Property Manipulation of Selective Laser Melted GRCop-84

    SBC: Special Aerospace Services            Topic: AF18AT009

    In partnership with the Colorado School of Mines Alliance for the Development of Additive Processing Technologies and with support from the Johns Hopkins University Energetic Research Group, Special Aerospace Services will provide the Air Force with characterization of fully dense Selective Laser Melted GRCop-84 subjected to a variety of manipulations that affect key performance metrics for regene ...

    STTR Phase I 2018 Department of DefenseAir Force
  3. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Analysis of Dislocation Density, Recrystallization, and Residual Stress in 5XXX Aluminum using Laser Peening to mitigate Exfoliation Corrosion

    SBC: HEPBURN AND SONS LLC            Topic: N18AT016

    Hepburn and Sons LLC teaming with The Ohio State University, Center for Electron Microscopy and Analysis (CEMAS) propose to research and develop an innovative application of laser peening technology to mitigate exfoliation corrosion, a special type of inter-granular corrosion that occurs on the elongated grain boundaries. Strongly related, these Mg based alloys, when exposed to tensile stresses, c ...

    STTR Phase I 2018 Department of DefenseNavy
  5. Laser Surface Melt Treatment and Galvanic Protection of 5XXX

    SBC: Luna Innovations Incorporated            Topic: N18AT016

    Exfoliation corrosion of 5XXX series aluminum alloy is an issue related to the sensitization of the aluminum substrate typically occurring at end-grains. The Navy is interested in preventing this corrosion to decrease lifetime costs on Littoral Combat Ships, Ship-to-Shore Connector vessels, and Ticonderoga class ships. Luna will investigate surface modification using laser surface melt processing ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Virus-Like Particle Based pan-Marburgvirus Vaccine

    SBC: Luna Innovations Incorporated            Topic: CBD18A002

    Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  7. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Complex Object Reflectance Characterization System (CORCS)

    SBC: NUTRONICS, INC.            Topic: AF18AT007

    Nutronics, Inc. and Montana State University propose to develop a method for characterization of the full Mueller matrix for reflective scattering from a test object. The Complex Object Reflectance Characterization System (CORCS) will initially be designed for laboratory use and characterization of test objects by active imaging to measure both the Mueller Matrix and the target depth associated wi ...

    STTR Phase I 2018 Department of DefenseAir Force
  10. Self-Calibrating, Conformal Nanomembrane based Pressure Sensors for Embedded Sensing Applications

    SBC: Nanosonic Inc.            Topic: AF18AT002

    This Air Force Phase I STTR program would develop self-calibrating, conformal nanomembrane (NM) based pressure sensors for embedded sensing applications, using SOI (Silicon on Insulator) NM techniques in combination with our pioneering nanocomposite materials.Such low-modulus, conformal nanomembrane sensor skins with integrated self-calibration, interconnect elements and electronic devices that ca ...

    STTR Phase I 2018 Department of DefenseAir Force
US Flag An Official Website of the United States Government