Award Data

Physically UnclonableFunctions (PUFs) have been proposed as central building blocks in cryptographic protocols and security architectures. PUFs are physical devices that exhibit a challenge/responsebehavior: when presented with a challenge, the device produces a response that is a random function of both the challenge and the physical properties of the device.In contrast to most digital designs, i ...

In partnership with the Colorado School of Mines Alliance for the Development of Additive Processing Technologies and with support from the Johns Hopkins University Energetic Research Group, Special Aerospace Services will provide the Air Force with characterization of fully dense Selective Laser Melted GRCop-84 subjected to a variety of manipulations that affect key performance metrics for regene ...

Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

Hepburn and Sons LLC teaming with The Ohio State University, Center for Electron Microscopy and Analysis (CEMAS) propose to research and develop an innovative application of laser peening technology to mitigate exfoliation corrosion, a special type of inter-granular corrosion that occurs on the elongated grain boundaries. Strongly related, these Mg based alloys, when exposed to tensile stresses, c ...

Exfoliation corrosion of 5XXX series aluminum alloy is an issue related to the sensitization of the aluminum substrate typically occurring at end-grains. The Navy is interested in preventing this corrosion to decrease lifetime costs on Littoral Combat Ships, Ship-to-Shore Connector vessels, and Ticonderoga class ships. Luna will investigate surface modification using laser surface melt processing ...

Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...

The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

Nutronics, Inc. and Montana State University propose to develop a method for characterization of the full Mueller matrix for reflective scattering from a test object. The Complex Object Reflectance Characterization System (CORCS) will initially be designed for laboratory use and characterization of test objects by active imaging to measure both the Mueller Matrix and the target depth associated wi ...

This Air Force Phase I STTR program would develop self-calibrating, conformal nanomembrane (NM) based pressure sensors for embedded sensing applications, using SOI (Silicon on Insulator) NM techniques in combination with our pioneering nanocomposite materials.Such low-modulus, conformal nanomembrane sensor skins with integrated self-calibration, interconnect elements and electronic devices that ca ...