You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Membranes for CO2 Capture from Existing Coal-fired Power Plants

    SBC: NEXTECH MATERIALS, LTD.            Topic: 24a

    Coal is an abundant source of energy in the USA, but is not currently utilized effectively. Recently, the DOE has begun a carbon sequestration program is to develop advanced CO2 capture and compression technology for existing coal-fired plants with increased efficiency with no more than a 35% increase in the cost of electricity. This will require new approaches and technologies to be successful. N ...

    STTR Phase I 2010 Department of Energy
  2. A MapReduce-like Data-Intensive Processing Framework for Native Data Storage and Formats

    SBC: RNET TECHNOLOGIES INC            Topic: 01c

    MapReduce is a very popular data analytic framework that is widely used in both industry and scientific research. Despite the popularity of MapReduce, there are several obstacles to applying it for developing some commercial and scientific data analysis applications. The project will develop a Native data FOrmat MapREDuce-like framework, iNFORMER, based on OSUs SciMate architecture. The framework ...

    STTR Phase I 2014 Department of Energy
  3. Amplifiers for High Repetition Rate Diode-Pumped Ultra-Intense Femtosecond Lasers

    SBC: XUV LASERS, INC.            Topic: 25c

    The problem being addressed is the development of high intensity ultrashort pulse lasers, in recognition that today’s ultra-high intensity lasers are limited to repetition rates of < 10 Hz. Technical solutions are sought to enable the generation of high energy (joule-level) laser pulses that can be focused to highly relativistic intensity at high repetition rates (100-1000 Hz). The proposed proj ...

    STTR Phase I 2019 Department of Energy
  4. Cavity Enhanced Thomson Scattering System for Low Temperature Plasmas

    SBC: Seaforth LLC            Topic: 30a

    Electrons play a very key role in plasma chemistry and dynamics of low temperature plasmas. Improved capability for measuring electron number density, ne, and electron energy distribution function, EEDF, in weakly ionized low temperature plasmas would benefit both fundamental study and application areas. For example, the capability would directly benefit emerging research targeted at modifying and ...

    STTR Phase I 2013 Department of Energy
  5. Cervical Spine Health Improvement Products

    SBC: SWITCHBOX INC            Topic: DHA18B001

    Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  6. Compositionally Gradient Garnet/PVDF-HFP Hybrid Membranes for Li-Metal Batteries

    SBC: HAZEN RESEARCH, INC.            Topic: 19a

    Development of Li-ion conducting membranes capable of supporting Li-metal anode to enable high- performance Li-metal batteries (LiMB) is a priority for the Department of Energy (DOE). State-of- the-art membranes used for Li-ion batteries (LiB) are not suitable for LiMB and have a number of disadvantages including poor cycling performance, low Li-ion conductivity, and electrochemical stability with ...

    STTR Phase I 2019 Department of Energy
  7. Defect Free, Ultra-Rapid Thinning/Polishing of Diamond Crystal Radiator Targets (20??m) for Highly Linearly Polarized Photon Beams

    SBC: Sinmat Inc            Topic: 46e

    The fabrication of high-quality ultra thin (~20 micron) diamond crystals targets for 9 GeV highly polarized photon beams is an outstanding challenge. Current state of the art polishing/thinning techniques are not successful in thinning single crystal diamond to such dimension because of its extreme hardness and chemical inertness. These techniques create significant stresses surface and sub-surfac ...

    STTR Phase I 2010 Department of Energy
  8. Durable High Temperature Coatings for Utility Scale Gas Turbine Hot Gas Path Components

    SBC: UES INC            Topic: 14c

    For advanced gas turbines where turbine inlet temperature reaches 2650F and beyond, the current state-of-the-art thermal barrier coating (TBC) systems are not adequate to provide the needed protection for the metallic components of the turbine engine. Thus there is a need to develop new chemistries and architectures for TBC systems (both bond coats and top TBCs) with enhanced durability. For the ...

    STTR Phase I 2014 Department of Energy
  9. Enhanced Capacitive Deionization using Carbon Electrodes Conformally Coated with Metal Oxides by Atomic Layer Deposition

    SBC: ALD NANOSOLUTIONS, INC            Topic: 02c

    Access to clean water is a global problem that has led to the development of multiple desalination techniques. All techniques strive to reduce the cost of desalinating water to provide clean water in a cost effective manner. Capacitive deionization (CDI) is a new technique that can reduce the cost of ownership by ~85% compared with reverse osmosis for brackish water. This project will further im ...

    STTR Phase I 2014 Department of Energy
  10. Flow Battery Structures to Improve Performance and Reduce Manufacturing Cost

    SBC: Faraday Technology, Inc.            Topic: 21d

    Redox flow batteries are a promising technology for electrical energy storage for renewable energy sources; however traditional redox flow batteries are limited in their use due to non-uniform pressure drops and mass transfer limitations, as well as high manufacturing costs related to the felt material costs for the electrode and component alignment challenges during manufacturing.General Statemen ...

    STTR Phase II 2013 Department of Energy
US Flag An Official Website of the United States Government