You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Multi-Functional Nanotube-Based Sensor Array for Detecting Blood Coagulation Defects

    SBC: Innosense Llc            Topic: DHP19A001

    Defense Health Agency (DHP) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

    STTR Phase I 2019 Department of DefenseDefense Health Program
  2. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA Research, Inc.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  3. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: Novaa Ltd            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  4. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHP17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Program
  5. Cervical Spine Health Improvement Products

    SBC: Switchbox, Inc.            Topic: DHP18B001

    Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he

    STTR Phase I 2019 Department of DefenseDefense Health Program
  6. Alignment Tolerant Optical Connector with Active Regenerative Element

    SBC: ULTRA COMMUNICATIONS, INC.            Topic: A12AT008

    This program creates a new class of advanced transceiver techology. This technology can create 40 Gbps VCSEL-based micro-transceiver (uTRX) components that operate reliably over the standard military temperature range of -55°C to 125°C in Army environments. uTRXs are low-cost, compact components that can be assembled onto the PCB in close proximity to high-performance ASICs using conventional ...

    STTR Phase II 2013 Department of DefenseArmy
  7. On Demand Energy Activated Liquid Decontaminants and Cleaning Solutions

    SBC: TDA Research, Inc.            Topic: A12aT005

    Decontamination of chemical and biological threats demands a very reactive solution. It is ideal to generate the decontaminants on-site: the activated decontaminant is highly reactive and quickly destroys chemical and biological warfare agents; prior to activation the ingredients can be safely stored for years, shipped, and handled. TDA's electrochemical decontamination (eClO2) technology u ...

    STTR Phase II 2013 Department of DefenseArmy
  8. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
  9. Low Cost Fabrication of Armor Protection Systems for Military Tactical Vehicles

    SBC: NexGen Composites LLC            Topic: A13AT021

    There is a great need and opportunity to develop lower cost manufacturing process for ceramic tile-based composite armor system for military tactical vehicles. The threat levels encountered by the military tactical vehicles, particularly due to the Improvised Explosive Devices (IED) pose an ever-increasing need for more lightweight and effective vehicle armor system at an affordable cost. A low-co ...

    STTR Phase I 2013 Department of DefenseArmy
  10. Mobile Health Application for Family and Behavioral Health Provider Communication

    SBC: INFERLINK CORPORATION            Topic: A13AT018

    Clinical monitoring of mental health status has not evolved much from the routine meeting between patient and clinician, which suffers from a lack of quantification, irregular and anecdotal reporting, and does not necessarily include input from caregivers. This is unfortunate given today's technology, where people routinely volunteer to track their own health related behavior, such as exerc ...

    STTR Phase I 2013 Department of DefenseArmy
US Flag An Official Website of the United States Government