You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Novel Treatment of Produced Waters from Shale Gas with Zero Liquid Discharge by Geothermal Heat

    SBC: SAVENGY TECHNOLOGIES., LLC            Topic: 17a

    Vast amounts of impaired waters are produced in gas and oil wells. Energy-efficient desalination systems are needed to treat these waters to produce fresh water and concentrated brines. Mineral recovery systems can also yield valuable critical materials as byproducts. Savengy Technologies and University of Central Florida (UCF) will develop and commercialize an energy efficient system to treat sha ...

    STTR Phase I 2019 Department of Energy
  2. New Crystalline Silicon Module Architecture to Reduce Costs withImproved Manufacturability andDurability

    SBC: Creative Light Source, Inc            Topic: 16a

    Direct Solar in partnership with Colorado State University's Next Generation PV Center (NGPV) and H. B. Fuller Company will develop a new solar module architecture and manufacturing process optimized for crystalline silicon (c-Si) modules that significantly reduces manufacturing costs and improves reliability. The outcome of this program will be a new c-Si module design, streamlined manufacturing ...

    STTR Phase I 2019 Department of Energy
  3. Infinitely Recyclable Bioplastics (Topic 8, subtopic b)

    SBC: SusMer, Inc            Topic: 08b

    Plastics are indispensable materials for the modern life and global economy, but current practices in the generation and disposal of commodity plastics are largely unsustainable and causing severe worldwide plastics pollution and enormous materials' energy and value losses to the economy. In particular, plastics are a material of choice in packaging applications but they are currently designed for ...

    STTR Phase I 2019 Department of Energy
  4. Interference coatings for high energy and average power femtosecond-class lasers in the 0.8-2?m wavelength range

    SBC: XUV Lasers, Inc.            Topic: 28e

    The problem/situation that is being addressed concerns the development of near infrared ultrafast interference coatings(IC) for high average power femtosecond lasers that will meet the specifications of the DoE solicitation: “broad-bandwidth, laser damage threshold of 0.5 J/cm2 (1 ps), engineered using a process that is scalable to large areas.” Advances in compact high gradient laser-driven p ...

    STTR Phase I 2019 Department of Energy
  5. Amplifiers for High Repetition Rate Diode-Pumped Ultra-Intense Femtosecond Lasers

    SBC: XUV Lasers, Inc.            Topic: 25c

    The problem being addressed is the development of high intensity ultrashort pulse lasers, in recognition that today’s ultra-high intensity lasers are limited to repetition rates of < 10 Hz. Technical solutions are sought to enable the generation of high energy (joule-level) laser pulses that can be focused to highly relativistic intensity at high repetition rates (100-1000 Hz). The proposed proj ...

    STTR Phase I 2019 Department of Energy
  6. Scalable Framework for Integrating Multi-Omics Data for Biosystem Analysis

    SBC: Omics Data Automation, Inc.            Topic: 01a

    Understanding the genomic basis of economically important plants for growth time, crop yield, responses to drought and disease resistance is of critical importance to sustaining and improving food supplies for humans and livestock, as well as insuring sufficient raw material availability for industries that depend on plant materials, such as biofuel manufacture. Current computational methods for a ...

    STTR Phase I 2019 Department of Energy
  7. Compositionally Gradient Garnet/PVDF-HFP Hybrid Membranes for Li-Metal Batteries

    SBC: HAZEN RESEARCH, INC.            Topic: 19a

    Development of Li-ion conducting membranes capable of supporting Li-metal anode to enable high- performance Li-metal batteries (LiMB) is a priority for the Department of Energy (DOE). State-of- the-art membranes used for Li-ion batteries (LiB) are not suitable for LiMB and have a number of disadvantages including poor cycling performance, low Li-ion conductivity, and electrochemical stability with ...

    STTR Phase I 2019 Department of Energy
  8. Cervical Spine Health Improvement Products

    SBC: Switchbox, Inc.            Topic: DHA18B001

    Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  9. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing of Scalable 3D Resonators

    SBC: Global Research and Development Inc.            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
US Flag An Official Website of the United States Government