You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. CRANE: Cervical Readiness Using Analytics and Non-Invasive Evaluation

    SBC: APTIMA INC            Topic: DHA18B001

    Current cervical spine assessment methodologies are focused on subjective measures (i.e. pain reports) and range-of-motion (ROM) measures that only measure maximum head excursion and reach, but not dynamic motion. Due to report bias and existing incentive

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  2. Cervical Spine Health Improvement Products

    SBC: SWITCHBOX INC            Topic: DHA18B001

    Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  3. Computerized Robotic Delayering and Polishing System

    SBC: SPECTRAL ENERGIES LLC            Topic: DMEA18B001

    The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could hel ...

    STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  4. Scalable Manufacturing of Composite Components Using Nanostructured Heaters

    SBC: METIS DESIGN CORP            Topic: N18BT031

    Manufacturing of structural composites traditionally employs autoclaves to achieve high quality parts, including high fiber-volume-fractions and low porosity. A laminate comprised of stacked prepreg plies are cured under a vacuum in addition to ~7 bar of pressure to prevent formation of voids, particulalry in interlaminar (inter-sheet/ply) regions. However, manufacturing composites within an autoc ...

    STTR Phase I 2019 Department of DefenseNavy
  5. Out-of-Oven Aerospace Composites

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: N18BT031

    Large aerospace composite structures currently require autoclaves and ovens to achieve desired performance which are expensive to purchase, costly to operate, and often limit part size and production rate. Ovens and autoclaves rely on convective heating which is inefficient, consumes large amounts of energy, and can be difficult to predict. Alternative cure processes using external heaters or hot ...

    STTR Phase I 2019 Department of DefenseNavy
  6. Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N18BT031

    For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...

    STTR Phase I 2019 Department of DefenseNavy
  7. Decision Support for Operators of Fully Autonomous Systems using RESTORE: Robust Execution System for Trusted Operation in Relevant Environments

    SBC: SCIENTIFIC SYSTEMS CO INC            Topic: N18BT032

    SSCI and MIT (Prof. Julie Shah) propose to develop and test a system that provides real-time assurance and trust in decisions made by autonomous collaborating vehicles. The proposed system is referred to as the RESTORE and represents a decision support tool which facilitates decision making by the operator in cases when decisions by the Collaborative Autonomy (CA) system results in deviations from ...

    STTR Phase I 2019 Department of DefenseNavy
  8. Optimized Higher Power Microwave Sources

    SBC: METAMAGNETICS INC            Topic: N19AT001

    HPM (high power microwave) weapons could disable vehicles, enable vehicle recovery, and reduce collateral damage. Metamagnetics, in partnership with Professor Jane Lehr (University of New Mexico), and General Atomics propose a completely solid-state HPM system based on their work in Gyromagnetic Nonlinear Transmission Lines (gNLTL) and compact High-Gain Slotted Waveguide Antennas. The system will ...

    STTR Phase I 2019 Department of DefenseNavy
  9. Interlaminar Reinforcement of Composite Rotorcraft Components via Tailored Nanomorphologies of Aligned Carbon Nanotubes (A-CNTs)

    SBC: METIS DESIGN CORP            Topic: N19AT003

    Composites are often used in aerospace applications due to their superior specific strength and stiffness properties, as well as their resistance to fatigue and corrosion. In particular for rotorcraft, composites offer additional benefits for their versatility in tailoring material properties for such components as rotor blades. However, rotors introduce additional challenges by including multiple ...

    STTR Phase I 2019 Department of DefenseNavy
  10. Targeted Enhancement of Critical Composite Interfaces using Vertically Aligned Carbon Nanotubes

    SBC: N12 TECHNOLOGIES, INC.            Topic: N19AT003

    Vertically-aligned carbon nanotubes (VACNTs) will be selectively applied at interfaces in laminated composite structures to effect locally the mechanical properties that limit rotorcraft structures, such as fatigue and damage tolerance. In Phase I this work will quantify these effects in CFRP and CFRP/GFRP hybrid coupons. The VACNT material will be transferred directly onto prepreg plies, but also ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government