You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Blockchain-enabled Peer-to-Peer Energy Trading Platform for Managing Complex Exchange of Kilowatt-hours and Negawatts

    SBC: BEMCONTROLS, LLC            Topic: 12c

    The structure of the electric utility business has long been a centralized model where an electric utility is the only authority selling electricity to, and buying excess rooftop PV generation, from customers. This is changing as utilities explore new business models including Distributed System Operator (DSO) models. On the other side of the meter, with the increasing penetration of rooftop solar ...

    STTR Phase I 2018 Department of Energy
  2. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  3. Additive Manufacturing of Scalable 3D Resonators

    SBC: GLOBAL RESEARCH & DEVELOPMENT, INC.            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: X-Wave Innovations, Inc.            Topic: DLA18A001

    Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Advanced Computation Methods towards High-Resolution Fiber Optic Distributed Acoustic Sensing

    SBC: Luna Innovations Incorporated            Topic: 21a

    Commercial-scale geothermal reservoirs are thousands of feet below the Earth’s surface, so scientists rely on indirect measurements to reconstruct 3D subsurface reservoir maps from seismic vibrations, electromagnetic waves, or gravity measurements. Geothermal operators typically use electromagnetic or gravity surveys, but seismic surveys are preferable because they enable higher-resolution 3D su ...

    STTR Phase I 2019 Department of Energy
  8. Advanced Membranes for CO2 Capture from Existing Coal-fired Power Plants

    SBC: Nextech Materials, Ltd.            Topic: 24a

    Coal is an abundant source of energy in the USA, but is not currently utilized effectively. Recently, the DOE has begun a carbon sequestration program is to develop advanced CO2 capture and compression technology for existing coal-fired plants with increased efficiency with no more than a 35% increase in the cost of electricity. This will require new approaches and technologies to be successful. N ...

    STTR Phase I 2010 Department of Energy
  9. Advanced Membrane Technology for Helium Recover

    SBC: Helios-NRG, LLC            Topic: 10d

    This Small Business Technology Transfer (STTR) Phase 1 project will lead to the development of a simple, cost effective technology which can recover helium from gas reservoirs containing helium concentrations too low to permit economic recovery at present. This will enable helium recovery from fields currently producing natural gas but considered uneconomical for the recovery of the contained heli ...

    STTR Phase I 2010 Department of Energy
  10. Advanced Methods for Predicting 3D Unsteady Flows Around Wind Turbines

    SBC: Continuum Dynamics Inc            Topic: 39a

    Wind power has an important role in satisfying the power needs of the United States. Since wind power is a clean renewable source of energy, it also serves an important role in reducing dependence on fossil fuels, in particular foreign oil supplies, as well as reducing greenhouse gas and carbon emissions. Unfortunately, significant maintenance costs, recently highlighted by a series of blade failu ...

    STTR Phase I 2010 Department of Energy
US Flag An Official Website of the United States Government